Bristol Double RV Waste Valves Dimensions

Question

Question:

Can you provide a dimension drawing for the subject part? Im interested in the distance between the 3inch entry into the valve and the 1.5inch entry so I can determine the spacing required for my black water tank and grey water tank

asked by: Peter C

0

Expert Reply:

The distance between the 3" entry and the 1.5" entry on the Bristol Double RV Waste Valves # 34466ND13AAR is 10-1/2". I've attached a picture for you showing some additional measurements as well.

expert reply by: Kevin C

0

Bristol Double RV Waste Valves
(click to enlarge)

Answer 1

The Double RV Waste Valves #T68C and the Bristol Double RV Waste Valves #34466ND17AAR are both going to serve the same purpose. The only real difference between the two is where they are manufactured. The Bristol Double RV Waste Valves #34466ND17AAR…

view full answer...

Answer 2

Dual waste valves, such as the Valterra #TR38A, are nearly generic by nature. This one has the standard 1-1/2" gray water gate and standard 3" gate, and has a "Y" shape. You should also look at the Bristol #34466ND13AAR Double…

view full answer...

Answer 3

Product #34466ND13AAR is a hub, a hub or a socket is the common female connection to PVC fittings. While #34466ND13BAR is a spigot, which is the end connection to a fitting that has to be assembled into another fitting; the spigot fitting has the…

view full answer...

Answer 4

I went and measured the threaded section of the Replacement Sidewind Handle Knob for etrailer and Ram Swivel Marine Jacks #MJ-1000B-KB and found it was approximately 1/2".

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 10

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 11

That's a great question, John! Yes, you can use the etrailer Replacement Fabric #e26QV in place of the Solera Replacement Fabric #LCV000334415. They are both made to work on the same size awning, so the fabric will be the same size and will…

view full answer...

Answer 12

Hello Kevin, Thanks for writing in. The main difference between the Power Watchdog Surge Protectors #HU67FR and #HU42VR comes down to the monitoring capability, housing design, and surge protection rating. The #HU67FR is the newer Generation 2 model.…

view full answer...

Bristol Double RV Waste Valves Dimensions

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching