Will Threaded Hitch Pin Work with Hitch Extender for 2 Trailer Hitches

Question

Question:

Is extension threaded so I can use Thule locking antirattle pin lock

asked by: Timothy C

0

Expert Reply:

The Trailer Hitch Extender for 2" Hitch Receivers - 8" Long # e88YR is not threaded. Therefore, you can use your threaded locking hitch pin on the bike rack side but you'll have to use a different locking hitch pin on the shank side like the etrailer Hitch Pin Lock part # e98881 or the Gen-Y Iron Grip Anti-Rattle Hitch Pin part # GY39FR which is anti-rattle.

Unfortunately, there won't be any extenders threaded for a hitch pin.

expert reply by: Conner L

0

Answer 1

Hey Ron, so we can help but the Curt anti rattle kit part #C69HR does not have a lock setup that it can be upgraded too. So best option would be to upgrade from the Curt to the part #63232 which is a similar anti-rattle device that is locking.

view full answer...

Answer 2

Yes, the Hitch Extender part #80307 will accept a 5/8 inch standard hitch pin/bolt.

view full answer...

Answer 3

I pulled one from the warehouse, and theTrailer Hitch Extender for 2" Hitch Receivers - 8" Long #e88YR does not have a hollow shank. It hass a solid steel shank, therefore it is not compatible with anti-rattle devices like the #SR25219…

view full answer...

Answer 4

Hey Mark I am glad to hear your like our video. The hitch extender in the video you mentioned is our etrailer brand hitch extender #e88YR. This is an 8' long extension made for a 2" hitch receiver.

view full answer...

Answer 5

Yes, the Trailer Hitch Extender for 2" Hitch Receivers - 8" Long #e88YR, is measured from the center of the hitch pin hole in the shank to the center of the hitch pin hole in the receiver portion of the extender. This measurement gives you…

view full answer...

Answer 6

The RockyMounts 1-1/4" to 2" Hitch Adapter Sleeve for MonoRail Bike Rack #RKY54FR will almost certainly not work. I do not know what Swagman bike rack you have, but the adapter sleeves for bike rack shanks are typically pretty specific to…

view full answer...

Answer 7

The Blue Ox Towbar Drop Receiver, part #BX88130, is an adapter that is designed to be used with tow bars only. The high-low adapters are only for use with a tow vehicle that will be flat towing another vehicle with a tow bar. Because the tongue…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 11

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 12

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Will Threaded Hitch Pin Work with Hitch Extender for 2 Trailer Hitches

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching