Best Suspension Enhancement for 2020 GMC Sierra 3500 Towing Fifth Wheel

Question

Question:

We have a 2020 GMC 3500 SRW Diesel Denali. Our 5th wheel is 18k. I have attached our weight report. It looks like I need to lose some pounds. But also, I want to upgrade our suspension system, the rear for sure, and if necessary, the the front too. We tow the 5th wheel around on a gooseneck ball with a Reese 20k inbox. The airbags on it can only do so much. I really want a better ride when we are towing, and when not towing too. We travel 5-6 months a year. Can you recommend everything I should get?

asked by: Gina R

0

Expert Reply:

For your 2020 GMC Sierra 3500 single rear wheel diesel the best suspension enhancement option we have is the RoadActive Suspension kit part # RAS3611-CHD for if you have factory top overload springs or # RAS3611-HD for if you do not have them.

Unlike other suspension enhancement options the RAS systems give you the best support while also improving ride quality loaded and unloaded unlike other options which make the ride quality rougher especially when unloaded. Stability and handling is also greatly improved too which is a nice bonus as well.

With the RAS kits I don't think you'll need to do front suspension as well.

expert reply by: Jameson C

0

Answer 1

I would be happy to explain the differences. The RoadActive Suspension Kit #RAS3611 has the standard capacity of 2,000 lbs. The #RAS3611-HD and #RAS3611-CHD have a 3,000 lb capacity since they are the heavy duty versions. The #RAS3611-HD is designed…

view full answer...

Answer 2

There are currently 3 kits available for your 2022 GMC Sierra 2500. The correct kit will depend on the leaf springs under your Sierra and the amount of sag you are experiencing. Do note that none of these systems will increase your payload or towing…

view full answer...

Answer 3

The best option for suspension enhancement for your 2020 Chevy Silverado 2500 that won't affect your ride is the RoadActive Suspension (RAS). This kit will offer support to your Chevy's suspension only when there is weight applied to it, like…

view full answer...

Answer 4

The Timbren Rear Suspension Enhancement System #TGMRCK25D you were looking at are confirmed to fit your 2021 Chevrolet Silverado 3500 towing a 16000lb 5th wheel trailer and will offer plenty of support, but will leave you will a very stiff ride when…

view full answer...

Answer 5

Thanks for the picture! I would definitely go with one of the HD kits over the 2,000 lbs RoadActive item #RAS3611 you were looking at. Which one you will need is going to depend on whether or not your 2020 Chevy Silverado 2500HD has the factory…

view full answer...

Answer 6

Hey Stephen, that is interesting you are having that much squad when using your WDH system. You would want to be using the 1,000 lb spring bars unless for some reason your tongue weight is more than 1,000 lb which would require even higher rated…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 12

Hey Mark, the only real downside to an offset ball like the Gen-Y part #GY43XR is going to be that it costs more typically and it would take up more room when stored compared to a non-offset ball like the #C38CR. The handling and weight carrying…

view full answer...

Best Suspension Enhancement for 2020 GMC Sierra 3500 Towing Fifth Wheel

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching