Spigot to Hub Black Water Tank Valve With 72 Inch Cable

Question

Question:

My Valve looks exactly like the Bristol but does appear to be spigot to spigot. Mines definitely 72” cable. Please look at pics and tell me if it’s spigot to hub?

asked by: Tim D

0

Expert Reply:

Thank you for the photos! Based on that it looks like you have a spigot to hub black water tank valve, like you mentioned, where the hub end fits over one pipe and the spigot end fits into the other pipe. So for a spigot to hub replacement valve with a 72 inch cable you will need the following:

- LaSalle Bristol Cable-Actuated RV Waste Valve for Black Water Tank - Spigot to Hub - 72" Cable # 34466N4AB72GMA

Then to complete the install you will just need the LaSalle Bristol ABS Solvent Cement # 3447530889.

expert reply by: Kyle S

0

Spigot to Hub Black Water Tank Valve
(click to enlarge)

Answer 1

Since the placement of the blank waste valve handle makes it hard to operate I recommend switching out the valve with a cable actuated valve that will allow you to place the handle exactly where you need it. The LaSalle Bristol Cable-Actuated RV…

view full answer...

Answer 2

Hey Shaun so there isn't a way to adjust the valve tighter but it does seem like yours maybe has a cable problem where it's not fully closing. I would check to make sure the handle is fully able to push in and there isn't something…

view full answer...

Answer 3

The gasket is the portion of the gate valve that's allowing waste water to leak through and not actually the gate. Both companies are using a rubber gasket that will eventually fail so it really comes down to the other features of the gate valve…

view full answer...

Answer 4

No, you don't want to put Kilz down. The adhesive for the LaSalle Bristol RV Roof Replacement Kit w/ XTRM Membrane item #344270KIT35 won't stick to the primer. It needs the bare wood. The item #344270KIT35 install kit comes with everything…

view full answer...

Answer 5

Hello Kate F, I too am a Kate F =) Yes, the Valterra #SS01 Sewer Solution can definitely work off-grid, but there are a few things to keep in mind to make sure it works well in your setup. The great thing about this system is that it doesn’t need…

view full answer...

Answer 6

The valves you are seeking to replace are made by many different manufacturers and are a standard size. The function of the valve is what you want to pay attention to as there are T-handle and cable options and then of course black water versus gray…

view full answer...

Answer 7

I would be happy to recommend a replacement waste valve for you, but unfortunately we do not have a break down of which style waste valve is used on a specific RV. A few of the different styles are a single 3" waste valve like the Valterra Waste…

view full answer...

Answer 8

I have a solution for you, but there isn't an adapter available that would allow you to connect your 4 inch sewer hose to the smaller macerator hose to create an extension. The macerator hose ends aren't threaded; they are held in place with…

view full answer...

Answer 9

The double valve you need to install on the 3-inch waste pipe in the photo is part #T84. This is the female valve designed to fit over a 3-inch pipe. To cap the 3-inch line you would need part #T50B. This is a waste valve that comes with a 3-inch…

view full answer...

Answer 10

The depth of the Valterra Waste Valve for RV Black Water Tank part #T50A measures 4-1/4" end to end without the cap but please note the fittings don't butt up to the end on either side.

view full answer...

Spigot to Hub Black Water Tank Valve With 72 Inch Cable

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching