Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
1,000 lb Sidewind A-frame Jack
Features:
A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball. To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight.
Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.
It's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping.
Every jack offers a certain amount of lift or travel. Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift. The total lift listed above can help you determine how high this jack will be able to raise your trailer.
Average Customer Rating: 4.9 out of 5 stars (80 Customer Reviews)
1,000 lb Sidewind A-frame JackThe Jack was easy to install and etrailer was the only place I could find the right one to fit my very old (1999) tent trailer.
Once I modified my camper tongue, the jack fit and operated flawlessly.
David
5/4/2021
Works great.
Most 1000 lb jacks are too wide for older camper trailers like mine. This was the only option i could find with a diameter of 2 inches! Took some elbow greasr, but once it went in the rest was easy and the included hardware worked very well. I would recommend adding 3-6 washers as they're not included and make a difference. It cranks clean and smooth! Great product so far. Customer service was very active and helpful in making sure I got what I needed and there were no issues. Odelia was very helpful! Thank you etrailer!
The trailer jack was easy to install and works great. The removable foot is very convenient.
ALL GREAT!! Shipped in just a couple of hours, arrived on time 4 days later, over the weekend. Fits perfect.
Unfortunately my initial search for a replacement for the Atwood Model 80274 suggested the Pro Series 2000 LB jack. But trying to install that jack I found it was too big. However talking directly to customer service they were able to direct me to thing model jack which was a direct replacement that I needed. They took back the wrong jack with no problems.
This was a good replacement for the original on our vintage camper. Pretty simple - just used a grinder to remove the welded on old one, and bolts to attach the new.
Once again, etrailer impresses me. Ordered my jack stand on Friday and it arrived on Saturday. What great service!
Woodjunky
9/10/2018
I love the products and the value. The lights and jack are hard at work on my boat trailer. Thanks for the follow up.
it has been doing fine with no problem
*Although I have not installed the trailer jack yet it looks like a direct replacement for the original one on my boat trailer. The wheel that goes with the jack definitely looks like a better fit than original.
*The electrical 4 conductor plug set... I'm using for a quick disconnect for a third
( center ) brake light for tailgaters
This trailer Jack has all the capacity and lift height I need. It cranks easy, has a nice finish and in my opinion, of good quality.
Excellent product the quality was better than the original jack on the camper from the manufacturer
PURCHASED NEW COUPLER, JACK, AND FOOT.
ALL WERE OF GOOD QUALITY, THE COUPLER, INSTALLED, QUITE EASILY, (REPLACEMENT FOR WORN OUT COUPLER)
THE JACK AND FOOT PA WORK VERY WELL.
HIGHLY RECOMMENDED
Looks like a good jack that will fit the smaller outer tube dimension for a vintage trailer.
Great product wish they had the option of coming without the triangle mounting. I will have to remove this but so happy to find this size for my vintage trailer!
Nice trailer jack. Fit perfect in place of my broken one.
Fit, value, product performance and customer service top notch !!!
Mr. L.
7/7/2020
Went on perfect and still working like a champ !!!
Although I haven't had a chance to install my new products yet I have to tell you how happy I was to recieve my shipment so quickly. Well done etrailer!
Works well
George, ordered it and it was here in 3 days, great service!
Thanks,
Perfect replacement. took about as long to install as it did to open the box. Great product.
Fit great
Product was exactly as described!
It fit correctly and works good!
Do you have a question about this Trailer Jack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Paul
9/4/2024
The trailer jack is working perfectly. Every easy to use. I will definitely use trailer for anything I need for this trailer!