Can the Fan-tastic Vent Series 1250 Vent Be Upgraded with the 7350 Series Upgrade Kit

Question

Question:

My 2021 Tab 320 came with a Dometic Fan-Tastic Fan Model FV1250. Can this be upgraded with an upgrade kit?

asked by: Vaughn

1

Helpful Expert Reply:

Yes. Your Fan-tastic Vent FV1250 can be upgraded with the Fan-Tastic Vent 7350 Series Upgrade Kit # FV807359 as long as your FV1250 isn't the clamp on style connection to the coach roof. I was able to confirm this with the manufacturer for you, as well.

expert reply by: Erik B

1

Answer 1

Fantastic Vent did update the remote control component of their vents back in January of 2014 so older units like yours cannot use the current replacement remote #FV9068-81. The upgraded vent model to replace yours is part #FV807350 which has a 12V…

view full answer...

Answer 2

I spoke with Dometic and they reccommend that you triple check that you have followed the instrucitons exactly they way they are as there is a jumper cable that is meant to be installed if you have the pancake style motor, and if left out you will…

view full answer...

Answer 3

Since the Fan-Tastic Vent Model 6500 is no longer in production, your best option is to upgrade to the 7350 series by way of the Fan-Tastic Vent 7350 Series Upgrade Kit #FV807359. This kit includes the screen assembly, the powered lift, and the…

view full answer...

Answer 4

We have spoken to Fan-Tastic Vent about this issue in the past, and they have confirmed that there are no replacement remotes available for the 6500 model as it's no longer in production. So if you want to still use your existing fan but also…

view full answer...

Answer 5

Hey Kenneth, the only way to replace the control board on the Fan-Tastic Vent Roof Vent part #FV807350 is with the Fan-Tastic Vent 7350 Series Upgrade Kit part #FV807359 since just the board by itself isn't available.

view full answer...

Answer 6

If everything else is working on your Dometic FanTastic Roof Vent w/ 12V Fan and Remote #FV807350 except the fan then either the wiring to the fan is damaged and needs to be replaced, or the motor is bad and you need to replace the assembly with the…

view full answer...

Answer 7

Functionally nothing at all. The difference between the Fan-Tastic Vent Roof Vent Assembly Upgrade Kit item #FV807357 and the Fan-Tastic Vent 7350 Series Upgrade Kit item #FV807359 is how they install. The item #FV807357 clamps securely around the…

view full answer...

Answer 8

The #FV807357 Fan-Tastic Vent Roof Vent Assembly Upgrade Kit will work for your 2019 Lance 2185 Travel Trailer if the opening meets the requirements. In order to install this vent, you must have a 14-1/4" x 14-1/4" opening approximately in…

view full answer...

Answer 9

Your Fan-Tastic Vent Roof Vent w/ 12V Fan and Remote - Powered Lift - 14-1/4" x 14-1/4" #FV807350 has 2 modes. Manual and Automatic. In the automatic mode the thermostat-regulated settings conserve energy by running only when preset…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Can the Fan-tastic Vent Series 1250 Vent Be Upgraded with the 7350 Series Upgrade Kit

Continue Researching