How To Determine Which Bearing Kit Is Correct For 1984 EZ Loader M522000 Boat Trailer

Published 07/13/2021

Products Featured in This Question

Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2

(94)

$67.16

Replacement Trailer Hub Bearing - L44649

(2137)

$21.99

4" Carbon Fiber Digital Caliper

(26)

$11.93

Question:

Hi, Im looking for wheel bearings for a EZ Loader boat trailer. 1984 Vin Model M522000. This is a single axle, 5 bolt hub. I have called EZ Loader also emailed but no response. What Im finding are a couple of options maybe. the #84 Spindle kit or 1inch BT8, Item #BK1-100? I was hoping to have a replacement set in hand when I take apart as apposed to take apart then order parts and had garage tied up. Thanks for any help

asked by: Terry

Expert Reply:

I do have an option for you, but unfortunately we do not have a breakdown of the specific bearings your 1984 EZ Loader M522000 Boat Trailer uses.

To determine the correct bearing kit for your trailer you will need to remove one of your current hubs and look for the bearing numbers stamped in the face of both the inner and outer bearings as shown in the included picture of the # L44649.

If your bearings are worn to the point that you cannot read the inner or outer bearing numbers you will need to use digital calipers # PTW80157 to precisely measure your spindle in the locations shown in the included diagram.

If you can provide the above information I would be happy to confirm the correct bearing kit for your trailer.

expert reply by: Samuel C