Front Mount Trailer Hitch Receiver For 2013 Chevrolet Silverado With Ranch Hand Front Bumper

Question

Question:

Would this front hitch mount up to my 2013 3500HD crew cab Duramax along WITH a Ranch Hand front bumper system?

asked by: Guy

0

Expert Reply:

I recommend the Curt Front Mount Trailer Hitch Receiver # C31023 for your 2013 Chevrolet Silverado. It will come out lower on the truck to clear the Ranch Hand front bumper you have.

The Draw-Tite Front Mount Trailer Hitch Receiver # 65078 comes out of the front bumper just below the tow hooks and this is right where the lower cross bar is on your Ranch Hand bumper.

expert reply by: Bud M

0

Ranch Hand Bumper
(click to enlarge)

Answer 1

A brush guard like the Westin HDX Grille Guard #57-3615 or a bull bar like the Aries #AAB35-4013 will mount in the same location as a front hitch receiver. The two will not be compatible because they mount in the same location so you will need to…

view full answer...

Answer 2

The Curt hitch #31322 is for 1500 models and will not fit a 3500HD. For your 2012 Chevy Silverado 3500HD diesel take a look at #C31023. I have included a link to the installation instructions as well as a video that shows a typical installation for…

view full answer...

Answer 3

Hi Mark; more than likely the 5-1/2" will work but it won't be the #SN27FR. With your 5-3/4" measurement you probably need the #SN39FR for square feet. These also fit 5-3/4" round Reico Titan jack feet which are common on a lot of…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Hey Vicky! Yes, the Meyer HomePlow Residential Hydraulic Snowplow #ME53FR includes the wired pistol grip controller. See the attached picture. You can use the plow on your 2003 Silverado as long as you have a front hitch with a 2" receiver.

view full answer...

Answer 8

Hey Micah! Pacbrake has actually been around for a long time, more than 60 years. We have had customers ask for these air bags in the past, and we've seen them on vehicles coming in. Until now, Firestone has been the go to since their quality is…

view full answer...

Answer 9

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 10

Yes, it will Mike! The EcoHitch Hidden Front Mount Trailer Hitch item #EH54QR is exactly what you need for your 2024 Ford F-350 dually. This hitch is specifically designed to fit the dually models. It has a 2" receiver with a 1,000 lbs vertical…

view full answer...

Answer 11

The RVP 8000 series AC model 8333A871 is effectively a Coleman Mach air conditioner, as RVP is the parent company and owner of the Coleman AC line of products; this means they will have the same wiring connections as a Coleman unit. To replace an…

view full answer...