Do All of the TorkLift Locking FastGun Turnbuckles have Springs

Question

Question:

do all four have the springs? I noticed the happy jack quikloads only have springs in the front turnbuckles, with rubber cushions for the rear.

asked by: Troy R

0

Expert Reply:

Yes all four of the TorkLift Locking FastGun Turnbuckles for Frame-Mounted Tie-Downs # TLS9522-2-LK that you referenced have springs in them.

expert reply by: Jameson C

0

Answer 1

Hey Jim, thanks for reaching out! The DeeZee Custom-Fit Truck Bed Mat #DZ28GJ will fit your 2024 Ram 3500 as long as it's an 8' bed, the TorkLift Tie Downs #TL75FV will fit the truck as well, and then the TorkLift Locking FastGun Turnbuckles…

view full answer...

Answer 2

For your 2020 Ram 3500 dually the correct Torklift tie downs are the part #TLD2142 and #TLD3112. You may also need the part #TLA7004 and to determine that you'd need to measure from front of camper slide in point to rear anchor point; kit is…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 8

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 9

Hey Cindy, thanks for reaching out. We may have an extension that will work for you. It will help to know exactly how long of an extension you are needing as this will be one of the main deciding factors. Let me know how long you need it to be in the…

view full answer...

Answer 10

Hi Brian, great question and I completely understand wanting to be sure everything lines up cleanly before you commit, especially with a newer truck and the SuperHitch in the mix. The TorkLift tie downs part #TL86NR are confirmed to fit your 2026…

view full answer...

Do All of the TorkLift Locking FastGun Turnbuckles have Springs

Product Page this Question was Asked From

Continue Researching