What Wheel Backspacing Is Needed To Use Timbren Axle-Less Suspension ASR3500S06?
Published 08/02/2021 >
Products Featured in This Question
Question:
Can you recommend a 5 on 4-1/2" hub?
asked by: Me M
Expert Reply:
Trailer axles like the Timbren Axle-Less Trailer Suspension System - 4" Lift Spindle - Regular Tires - 3,500 lbs # ASR3500S06 you were looking at are designed to work with trailer wheels that have 0 offset, so you will want to make sure the wheel you use has 0 offset. You can tell if a specific wheel has 0 offset by its back spacing, a wheel with 0 offset will have backspacing that is exactly half of the width of the wheel.
0 offset means that the surface of the wheel that touches the hub is exactly in the middle of the wheel, and not further back or further forward. The vast majority of trailer wheels do not have offset, so this should not be an issue.
Now with the # ASR3500S06 installed you will have 6" of clearance between hub face and frame of the trailer, so you can run a tire up to 10" wide on a wheel with 0 offset without having interference issues.
I included a video of the # ASR3500S06 for you to take a look at.
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Standard Duty - 4" Lift - 4 Bolt Flange - 3,500 lbs
- Trailer Axles
- Rubber Spring Suspension
- Standard Grade
- No Hubs
- 3500 lbs
- Spindles Only
- Universal Fit
- Lift - 4 Inch
- Timbren
more information >
Featured Help Information
Instructions
Miscellaneous Media




Continue Researching
- Search Results: brake controller
- Shop: Timbren Axle-Less Trailer Suspension - Standard Duty - 4" Lift - 4 Bolt Flange - 3,500 lbs
- Shop: Dutton-Lainson Boat Trailer Jack w/ Wheel - Sidewind - 12" Lift - Black - 1.5K
- Shop: Brake Controller
- Search Results: timbren
- Search Results: 4 way to 7 way
- Search Results: trailer brake controller
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Search Results: ark trailer jack
- Search Results: xo750
- Search Results: corner steadies
- Shop: Tekonsha Prodigy RF Wireless Brake Controller - Trailer Mount w Remote - 1 to 3 Axles - Proportional
- Shop: Karrier ST175/80R13 Radial Trailer Tire with 13" Aluminum Wheel - 5 on 4-1/2 - Load Range D
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Video: Timbren Axle-Less Trailer Suspension System Test Course
- Q&A: Comparing the eTrailer and Dexter Electric Trailer Brake Kits
- Video: Review of Ark Black Jack Foot XO750 Series Ark Xtreme Off-Road Swivel Trailer Jack - ARK69FR
- Video: Review of Ark Trailer Jack - Xtreme Off-Road Swivel Trailer Jack - ARK39FR
- Video: Ark Xtreme Off-Road Tube Mount Swivel Trailer Jack- Sidewind Spec Review
- Shop: Trailer Wiring
- Q&A: Required Negative Offset to Fit Oversize Tires on Timbren Axle-Less System ASR5200S03
- Q&A: Timbren Axle Less System with 5 on 5 inch Bolt Pattern
- Q&A: Overall Length of the 24" and 30" Ark Drop Down Corner Stabilizer Jacks
- Q&A: Recommended Trailer Jack for a 5'x8' Utility Trailer
- Q&A: Availability Of 33" Ark Stabilizer Jack And Dimensional Diagrams Of Similar Ark Corner Steadies
- Video: Easy Grease Trailer Hub and Drum Assembly Feature Review
- Video: Complete Breakdown of the Dexter Nev-R-Adjust Electric Trailer Brake Assembly
- Video: Detailed Breakdown of the Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles
- Q&A: Recommended Wheels And Tires For A Timbren Axle-Less Trailer Suspension


Me
8/2/2021
Can you recommend a 5 on 4-1/2" hub?