Comparing EZ Flex and MORryde Cushioned Equalizers for RV

Question

Question:

im looking at the two equalizer systems for my 2020 sundance trailer. I sone product better than the other and why?

asked by: Matt S

0

Expert Reply:

I'd recommend the Morryde cushioned equalizers over the EZ Flex since they have vertical cushioning whereas the EZ Flex cushions horizontally so the ride quality isn't as improved as much. So I'd go with the part # MR87ZR for sure over the # K71-652-00.

expert reply by: Jameson C

0

Answer 1

Yes, the MORryde upgraded shackle and wet bolt kits do work with the Dexter EZ Flex equalizers. For a tandem setup like you have we have the part #MR46ZR for if you need 2-1/4 inch shackle straps or part #MR76ZR for if you want 3-1/8 inch shackle…

view full answer...

Answer 2

Yes, the MORryde Rubber Equalizers #MR87ZR will help to improve your ride quality. These help to absorb a lot of the shock transfered through the suspension into your trailer. It can also increase the travel for the suspension keeping the weight more…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 5

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 6

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Answer 7

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 8

Hi Calvin! All of the pre-greased hubs/drums, like the Terran Industries Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 4-1/2 #TX68VJ, come with bearings made overseas and are all basically the same quality. At least that I…

view full answer...

Answer 9

Hi Chas, The Lippert Road Armor Shock Absorbing Equalizer part #LC53CK may work for your trailer, but that will depend on what equalizer is currently on your trailer. In order to determine what equalizers would be a fit for your trailer, we'll…

view full answer...

Answer 10

Hey Eric. Axle spacing isn't the best way to determine what replacement equalizers you need. The most accurate way to find a replacement is to match up a replacing equalizer as close as possible to the dimensions of the one currently on your…

view full answer...

Answer 11

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 12

There is no exact way to determine the leaf spring length. The best way to determine the length for a replacement is by measuring the existing leaf springs. The hanger distance and shackle length can help you get a good idea, but you're looking…

view full answer...

Comparing EZ Flex and MORryde Cushioned Equalizers for RV

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching