Correct Replacement Idler Hubs for Champion Boat Trailer
Updated 06/29/2021 | Published 06/28/2021
Products Featured in This Question
Question:
I have 1993 Champion Boat trailer I need new hubs for. Spindle dimensions are Seal Seat - 1.620, Inner Bearing seat 1.375, Outer bearing seat 1.060. 15 inch wheels 5 on 4 1/2. Current hub has L68149 inner, L44649 outer bearings and 168233 grease seal. AKIHUB-545-35-G-K looks like the correct hub except the grease seal that comes with is Inner diameter: 1.719, which seems a little big for a spindle with 1.620 Inner Bearing seat. My spindles are a little rough so I would like bearing to replace the standard seals with buddy seals with stainless steel rings and also need new pair of Bearing buddy caps for new hub. Can you assist please?
asked by: Darrin
Expert Reply:
The L68149 and L44649 bearing combo is very common and mostly used on 3,500 lb axles. These will then use a standard 1.719" I.D. x 2.565" O.D. grease seal. There are no bearings or seals with the exact dimensions you listed so the Trailer Idler Hub Assembly part # AKIHUB-545-35-G-K is likely what you need as all the dimensions are very close. The correct Bearing Buddy Bearing Protectors would then be part # BB1980A-SS.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Idler Hub
- Standard
- L68149 / L44649
- Marine Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Search Results: oil bath hubs
- Shop: Kodiak XL ProLube Kit for 3500-lb Axles
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Search Results: 10~19 grease seal
- Search Results: 10~9 grease seal
- Search Results: 10~19
- Search Results: grease seal 58846
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Q&A: Recommended Replacement Hub and Drum Assembly Kit for a UFP HD-1377-10 Hub and Drum
- Q&A: Trailer Hub/Drum to Replace Damaged UFP HD-1377-10
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Video: Easy Grease Trailer Hub/Drum Assembly for 3.5K Axles Review
- Video: Kodiak XL ProLube Kit for 3500-lb Axles Feature Review
- Shop: Kodiak XL ProLube Oil Bath Hub Body and Cap - 1.98"
- Q&A: Can The UFP Hub/Drums HD-1377-10 Be Resurfaced Or Will They Need Replaced?
- Video: Complete Breakdown of the Dexter Trailer Hub and Drum for 3,500-lb Axles
- Video: Complete Breakdown of the Easy Grease Trailer Hub/Drum Assembly for 3.5K Axles
- Q&A: Will Pre-Greased 6-Lug 3,500 lb Trailer Axle Hub/Drum Easily Fit In Place of 5 Lug Hub
- Video: etrailer Easy Grease Trailer Hub and Drums Installation - 2020 K-Z Sportsmen Classic Travel Trailer
- Q&A: Inspecting Trailer Hub And Spindle For Signs Of Damage
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Trailer Wiring Diagrams
- Video: Measuring To Choose The Right Trailer Axle
- Search Results: trailer tires and wheels
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
on Trailer Hubs and Drums
