Replacement Shoulder Bolts and Nuts For Roadmaster Falcon 5250 Towbar

Question

Question:

I need two shoulder bolts and nuts for the older falcon2 5250. Can they be purchase separately. I purchased the RM910003-52 kit. But I think I stripped one of the nut threads. Better safe than sorry? If so do you have a PN?

asked by: George E

0

Expert Reply:

The shoulder bolts for a Roadmaster Falcon 5250 are not available outside of the Roadmaster Repair Kit for Falcon Towbars # RM910003-52. They are also available in the Complete Repair Kit for Roadmaster Falcon Tow Bar 5250 # RM-910003-55.

expert reply by: Erik B

0

Answer 1

There are a couple of good anti-rattle options for you, but definitely do not drill a hole into the receiver as it can compromise it. So what you can do is either add a clamp-on style stabilizer, or an anti-rattle hitch pin lock, depending on the…

view full answer...

Answer 2

First, before flat towing your 2011 Mini Cooper, be sure the tires are filled to the recommended psi and in good condition. More importantly, be certain your steering column is not locked; if your tires are unable to turn they would wear out quickly.…

view full answer...

Answer 3

The reason for this comes down to safety and the additional pressures that would be exerted on the components when your Blue Ox Ascent #BX4370 tow bar is not level. The additional force that is put on these components ultimately makes it more likely…

view full answer...

Answer 4

I think you might have meant the Falcon 5250 tow bar. The complete repair kit is #RM-910003-55. This kit contains the components to replace the Falcon 5250 shoulder bolts, bushings, washers and end caps and also contains the components to replace the…

view full answer...

Answer 5

The serial number is located on the passenger side tow bar arm. See the attached illustration.

view full answer...

Answer 6

I'm assuming you're speaking of the 3/4 inch bolt and nut that joins the yoke to the stinger assembly, which are items #14 and #15 as shown in the provided diagram. If that's what you're speaking of, then yes we do offer that nut and…

view full answer...

Answer 7

For your 2018 Honda Civic RS hatchback with sunroof I recommend the Rhino-Rack RS 2500 Roof Rack for Naked Roofs - Vortex Aero Crossbar - Aluminum #RR78TR which will have more of a factory look with the bars ending in the towers. If you want more of…

view full answer...

Answer 8

I spoke with my contact at RockyMounts and if you already have the Thule WingBars like #TH711220, he recommended using the TieRod Replacement Hardware (front) #RKY2220 and (rear) #RKY2230 on your existing PitchFork arm to allow you to mount your…

view full answer...

Answer 9

The Thule WingBars, like part #TH711200 have a top opening of 1/2 inch and a 3/4 inch width at the bottom.

view full answer...

Answer 10

According to Thule, at one time they did the OEM roof racks for BMW/Mini, but that's been several years ago so they can't provide any information on anything more recent than 8 or so years ago. The good news is that I can simply provide you…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Replacement Shoulder Bolts and Nuts For Roadmaster Falcon 5250 Towbar

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching