Recommended Hub for a 2016 Yacht Club WC112 Trailer

Updated 06/22/2021 | Published 06/20/2021

Question:

I need hub assembly + bearings kit and dust cap for my 2016 Yacht Club WC112. VIN # 4H1001319H0511965 THANK YOU

asked by: Tammy

Expert Reply:

You will need to confirm your bearing numbers and wheel bolt pattern to make sure the correct parts are ordered. Unfortunately we do not have a way to look up the VIN on a trailer, but if you contact the manufacturer of the trailer, they should be able to tell you exactly which inner and outer bearings you have and the bolt pattern of your wheels.

If for some reason they can't, you will need to pull off one of the hubs. Once it is off, you will need to measure the inner diameters of both your inner and outer bearing. This should be done with calipers as it does need to be as precise as possible.

To get your bolt pattern, you will need to measure from the center of one lug bolt to the center of the lug bolt right next to it (picture included). The following measurements will tell you which bolt pattern you have:

If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
If D = 3", then the bolt pattern is 5 on 5"
If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"

If you have a 4 bolt pattern, you can skip that part though.

Once you have the bolt pattern and the inner and outer bearings, we can definitely get you the correct hub assembly.