Bracket Spacing Dimensions of Inno Fairing # INA260

Question

Question:

I see the Fairing is listed at 31 inches long, but I need to know the distance between the outer brackets. Space is limited on my front crossbar because of 2 bike racks and a ski rack I use for fishing poles. Thanks!

asked by: Brendan

0

Expert Reply:

I attached a picture that has all of the dimensions of the Inno Fairing part # INA260 that you referenced.

expert reply by: Jameson C

0

Fairing Dimensions
(click to enlarge)

Answer 1

The Inno Fairing for Roof Racks #INA260 referenced in your question is designed to fit most factory crossbars that are up to 1 inch tall, 3-1/2 inches wide and 1-1/8 inches in diameter. The 5 inch dimension you provided for your Kia Roof Rack would…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

We sure do Rob and congrats on the new SUV. To add a hitch to your 2026 Nissan Rogue, I recommend the etrailer item #e93ZR. This hitch is custom fit for your Rogue and comes with all hardware necessary for installation. The crosstube mounts entirely…

view full answer...

Answer 5

Hey John, we'd be glad to help you pick out the best lift assisted kayak carrier for your 2026 Subaru Outback Wagon! I think the Thule Hullavator part #TH898 would be your best option as it is a little easier to use and load so that's what I…

view full answer...

Answer 6

Hello Noah, thanks for reaching out. You can absolutely still install a trailer hitch on a 2025 Nissan Rogue with the rear kick sensor. The problem is the hitch will limit the functionality of the sensor. In most cases the kick sensor will still work…

view full answer...

Answer 7

Hey Jelmer, it looks like your 2022 Nissan Rogue SV has a towing capacity of 1,500 lbs meaning that the tongue weight would between 110 lbs - 225 lbs (10-15% of max towing capacity), so you're going to want to follow whatever your actual tongue…

view full answer...

Answer 8

Hey Nick congrats on the new car! The bottom portion of the receiver for the Curt item #C69VV sits 11-3/4" above the ground when installed on your 2025 Subaru Outback Premium. If you're worried about ground clearance, I recommend installing…

view full answer...

Answer 9

I recommend the Thule WingBar Evo roof rack for your 2024 Subaru Outback Wilderness. For this you will need the Crossbars #TH711320 and Feet #TH710401. I prefer this system as the crossbars use a 2-piece channel seal which allows you to easily add…

view full answer...

Answer 10

I'm sorry for the confusion Doug as this is a common issue with our fit guide with vehicles like your 2024 Subaru Outback. On the Malone AirFlow2 Roof Rack #MAL74AR you found we list both excluding Wilderness and Wilderness to say it will fit…

view full answer...

Answer 11

Hi Jessey! We have everything you need for your 2024 Subaru Outback. To start, I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C67JR. This is a little bit of work to get installed, but it is going to be the best…

view full answer...

Answer 12

Hello George, In order to get a 7 way on the back of your 2024 Subaru Crosstrek Wilderness, you will need to start with the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #118467. The #118467 will get the 4 flat on the back, but then…

view full answer...

Bracket Spacing Dimensions of Inno Fairing # INA260

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching