Recommended 2" Dust Caps for a 1994 Coleman Destiny Trailer
Updated 06/10/2021 | Published 06/08/2021
Products Featured in This Question
Question:
Hi I’m looking for dust caps for a 1994 destiny Coleman cedar the oem manual shows a p/n 4714A0621... ,
asked by: Davide
0
Expert Reply:
From what I could find out about the part number 4714A0621, it looks like it is a 2 inch diameter standard grease cap. So with that being said, the TruRyde 1.988" OD Drive In Grease Cap # RG04-020 will be what I suggest. These will fit your hubs nice and securely.
expert reply by:
Lazer S
0
Product Page this Question was Asked From
Grease Cap, 2.44" OD Drive In - Qty 2
- Trailer Bearings Races Seals Caps
- Caps
- Standard Grease Cap
- 2.44 Inch O.D.
- 2.44 Inch
- 5200 lbs Axle
- 6000 lbs Axle
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Lippert Grease Seals - Double Lip - ID 1.719" / OD 2.565" for 3,500-lb to 4,400-lb Axles
- Q&A: Replacement Bearings, Races and Seal for 1993 Coleman Destiny Pop Up Camper
- Video: A Closer Look at the Replacement Trailer Hub Bearing
- Video: Detailed Breakdown of the Grease Seal
- Shop: Replacement Trailer Wheel Bearing - L44649 - Qty 1
- Shop: Grease Seal - Double Lip - I.D. 1.372" / O.D. 1.983" - UFP Trailer Buddy 2K - 2.5K - Qty 1
- Video: Breaking Down the 2" Lubed Dust Cap and Rubber Plug
- Shop: Dexter's E-Z Lube Grease Cap and Plug Kit - 2.45" Outer Diameter
- Shop: 2" Lubed Dust Cap & Rubber Plug - 1.99" x 1.40" x 1.18" - Qty 1
- Shop: Grease Cap, 1.988" OD Drive In - Qty 2
- Shop: Trailer Hitch
- Shop: Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Search Results: trailer brakes
- Search Results: trailer hubs and drums
- Shop: Trailer Wiring
- Search Results: trailer axles
- Shop: Base Plate for Tow Bar
- Search Results: trailer breakaway kit
- Search Results: trailer bearings races seals caps
- Search Results: brake actuator
- Search Results: gooseneck coupler
- Q&A: Replacement Torsion Arm Kit w/a 5 on 4-1/2" Lug Nut Pattern for a 3,700 lbs Dexter Versa-Flex
- Article: Trailer Brakes Not Working? Troubleshooting Guide
- Q&A: Can Onan Generator - QG 7000i Use Remote Start
- Q&A: Replacement for Atwood 61101 Brake Actuator
- Q&A: Adjusting Dexter 10K Electric Trailer Brakes
- Q&A: Replacement Grease Seals for Dexter Part # 010-036-00 on a 7,000lb Trailer Axle
- Q&A: Installing Trailer Brake Controller on 2014 Chevy 4500 Chassis
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)