Does Draw-Tite Front Mount Hitch DT45MR Fit 2021 Chevrolet Silverado 1500 W/ 2.7L Engine?

Question

Question:

I noticed some other front mount receivers said they were not compatibile with a 2021 Silverado with 2.7 T engine option. Can you confirm that this draw-tite receiver with fit a 2021 Silverado 1500 with 2.7 engine?

asked by: Greg S

0

Expert Reply:

I sure can!

The Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2" # DT44HR you were looking at was manufactured by Draw-Tite with taller mounting brackets so that it would work with the the 2.7L and 3.0L engines in the new 2021 Chevrolet Silverado 1500 like yours.

I included a link to the written instructions of the # DT44HR for you to take a look at.

expert reply by: Samuel C

0

Answer 1

The Draw Tite front hitch #DT44HR that fits your 2021 GMC Sierra 1500 comes through the lower air dam. The reason it does not come out under it is because that would put the hitch pretty low to the ground. You will have to trim a small section of the…

view full answer...

Answer 2

The Draw-Tite Front Mount Trailer Hitch Receiver #DT44HR will fit your 2019 Chevrolet Silverado LT 4wd with the 2.7L turbo engine. This receiver has taller brackets designed to fit the intercooler installed on trucks like yours having a turbo…

view full answer...

Answer 3

So long as your 2020 Chevy Silverado 1500 is a gas version and not a diesel, then the EcoHitch front hitch you asked about does indeed fit, with the correct part number being the following: - EcoHitch Hidden Front Mount Trailer Hitch Receiver #EH58RR…

view full answer...

Answer 4

The Draw-Tite Front Mount Trailer Hitch Receiver #DT44HR will fit your 2019 Chevrolet Silverado 1500 with the 2.7L turbo. It has the taller brackets to clear the intercooler for your turbo engine. Be sure to get a Draw-Tite QSP Trailer Hitch Silencer…

view full answer...

Answer 5

Yes, the Draw Tite front hitch part #DT44HR fits all models of the 2020 Chevy Silverado 1500 including models with the 2.7 liter turbo engine.

view full answer...

Answer 6

The Draw-Tite #DT44HR is indeed confirmed to fit a 2021 GMC Sierra 1500 2.7 Turbo. I do need to mention that there will be trimming required to install this hitch, though. I couldn't confirm if this will be different on the Elevation package as…

view full answer...

Answer 7

Yes, The Draw-Tite Front Mount Trailer Hitch Receiver #DT44HR is confirmed to fit your 2022 Chevrolet Silverado 1500 LTD with a 2.7 Turbo. This front mount hitch has an easy, bolt-on installation with no welding required. It has a black powder coat…

view full answer...

Answer 8

Hi Timothy; for your 2022 Chevy Silverado 1500 diesel we have the Draw-Tite Front Mount Trailer Hitch Receiver #DT44HR. This is the only front hitch without the diesel restriction.

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Does Draw-Tite Front Mount Hitch DT45MR Fit 2021 Chevrolet Silverado 1500 W/ 2.7L Engine?

Continue Researching