Solera Awning Head Pin for RV Awning

Question

Question:

How can I get the right size head pin for my awning?

asked by: Kenneth O

0

Expert Reply:

The replacement pin you need is the part # LC93FR.

expert reply by: Jameson C

0

awning head
(click to enlarge)

Answer 1

Based on the pictures you definitely need the awning support arm #LC281154. I can't tell in that other photo if the pin is bent or damaged, or just barely hanging in there. I'm also not sure if your idler head and roller endcap are ok or not…

view full answer...

Answer 2

Hello Mike, thanks for reaching out. The best way to differentiate between the plain and regal style awnings is by looking at the drive head. The regal drive head is a little skinner and doesn't have a logo on it. The plain drive head has a LCI…

view full answer...

Answer 3

You are correct. The Replacement Head Pin for Solera Power Awning Gear Drive Head #LC93FR is the exact replacement for the bent pin on your Solera awning.

view full answer...

Answer 4

I was able to have the Replacement Head Pin for Solera Power Awning Gear Drive Head #LC93FR pulled from our warehouse and got the following dimensions for you. Overall length: 4-1/16" Length between notches: 1" Distance from pin hole to end…

view full answer...

Answer 5

Hey Jim, yes the parts you saw in a different answer are correct for your 20 foot Solera awning: Replacement Head Pin for Solera Power Awning Gear Drive Head part #LC266141 Replacement Retaining Clips part #LC266137 Replacement Bushing part #LC281828…

view full answer...

Answer 6

I spoke with Lippert, and they informed me that for your Lippert awning you are going to need the: -Replacement Gear Pack for Lippert Solera Awning Motor #LC78VR, with the Replacement Head Pin for Solera Power Awning Gear Drive Head #LC93FR.

view full answer...

Answer 7

In order to find the cause of the slippage issue you will need to disassemble and inspect the different components. The two most likely culprits are the motor and gear pack. If these are damaged we do offer replacements for them, the Replacement Gear…

view full answer...

Answer 8

It sounds like you have a Solera Power Awning on your Salem Hemisphere. Based on what you have described either the drive pin is broken/sheared or a gear is broken inside the drive head. I recommend checking both to see if you can confirm this is the…

view full answer...

Answer 9

Yes, we have a fairly detailed install process to remove and install a power awning head such as the Solera Power Awning Drive Head part #LC273478 which I have attached for you below. If you have any questions on this process please just let me know.…

view full answer...

Answer 10

I believe you are talking about the head pin for the drive head, and there are replacement pins available, but it does depend on the specific awning you have, as the pins are for certain drive heads (we don't have a way of knowing what awning is…

view full answer...

Answer 11

If you are referring to the head pin then yes we do have this available as the Replacement Head Pin for Solera Power Awning Gear Drive Head part #LC266141. That said, you would also want two Replacement Retaining Clips part #LC266137 and one…

view full answer...

Answer 12

I reached out to Lippert and they confirmed that you will need the Replacement Head Pin #LC93FR for Solera Power Awning Gear Drive Head #LC273478.

view full answer...

Solera Awning Head Pin for RV Awning

Product Page this Question was Asked From

Continue Researching