Detailed Breakdown of the Replacement Drive Head Motor Gear Pack for Solera Power RV Awnings Video

I spoke with Lippert, and they informed me that for your Lippert awning you are going to need the: -Replacement Gear Pack for Lippert Solera Awning Motor #LC78VR, with the Replacement Head Pin for Solera Power Awning Gear Drive Head #LC93FR.

If you are referring to the head pin then yes we do have this available as the Replacement Head Pin for Solera Power Awning Gear Drive Head part #LC266141. That said, you would also want two Replacement Retaining Clips part #LC266137 and one…

Yes the gear pack part #LC78VR does work with both the motor kits you mentioned of #LC266149 and #LC373566.

Hello Larry, thanks for reaching out. We offer the Regal-Style Idler Head Covers in black #LC672052 and in white #LC672051. I am sorry to say that we do not offer them in brown. I do not recall ever seeing one in brown so they must not be as common.…

I have a solution for you, but my contact over at Lippert tells me that you won't be able to replace just those casings on Solera Slide-Out Topper. The parts you need are the Replacement Idler Head and Roll Tube for Solera RV Slide-Out Awning -…

The Regal Drive Head #LC53TF is a little skinnier and doesn't have a logo while the Plain Drive Head #LC273478 is a little wider and has the LCI logo on it (see attached).

For replacing the Drive Head #LC34FR and Idler Head #LC87FR on a Solera Slide Topper you will want to completely remove the slide topper from your RV/Camper. You will need to insert a pin into the end of the tube end cap(see image) to keep the…

To remove the old pin you'll need to remove the cover, remove the two retaining pins, and then slide the old pin out. To install the #LC93FR you'd just reverse the process.

There aren't any fuses in the motor or arm. It is possible that the motor burned out or the drive head gears #LC353964 have gone bad. If you need a replacement motor then you will use the Solera Power Awning Replacement Motor #LC266149. The best…

Not quite, there is an additional screw below the wax screw in the end cap that also must be removed on the Solera Power Awning Idler Head #LC672052. From here you can remove the roll tube from the drive head. After the drive head is removed, there…

Since you were looking at the Regal style idler head #LC672052 I'm assuming you need to replace the idler head pin on your Solera awning. You can remove the old pin and install #LC27WD for a replacement. If by key you mean a cotter pin, then yes…

Hey Dave, The drive pin from the drive head of the awning has two flat sides to match up to the opening in the gear pack #LC78VR. This locks the pin and gear pack together so both will turn at the same time.