Do Roadmaster Comfort Ride Shocks For 3,500 lb Axles Affect Warranty of Axle  

Yes, the Roadmaster Comfort Ride Add-On Kit #RM-2450-50 can be installed on trailers like yours that have the leaf springs mounted above the axles. I have actually attached an image from the complete installation manual that shows this orientation.…

Shocks make a huge difference in smoothing out the ride quality of a trailer. I would argue they will do a better job than anything else if the goal is to improve ride quality. Adding more suspension support like with a Timbren will reduce sag but…

I was able to determine that your Lippert axles are 3,500 lb capacity axles so the Roadmaster Comfort Ride Shock kit you'd want would be the part #RM-2450.

I do have an upgrade option for your 6-1/16" long, 4" tall Equalizer #TREQ310, and since you don't want to lower the ride height with the E-Z Flex #K71-652-00, I recommend going with an option from MORryde, as the Equa-Flex are just too…

You could use the Dexter E-Z Flex #K71-652-00 tandem axle suspension upgrade kit for 6K axles or #K71-653-00 for 8K axles. If you used the #K71-652-00, you'd need an equalizer hanger about 2 inches longer to make up that height difference and not…

The Roadmaster Comfort Ride Shock Absorbers for Tandem Axle Trailers part #RM-2450 is designed for 3,500 lb, 2-3/8" diameter axles. It will work with both underslung and overslung axles. That said, if you have any sort of spacer installed…

The correct over/under conversion kit for your 2022 Salem Cruise Lite 240BHXL will depend on if it has 2-3/8" or 3" round axles. It is highly likely you have 2-3/8" axles, which are 3,500 lb axles, but you will need to verify. I'll…

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

The Roadmaster #RM-2450 Comfort Ride Shock Absorbers for Tandem Axle Trailers is designed for 3500 lb axles. A 3500 lb axle would typically use a 2-3/8 inch diameter axle tube. I don't have any way to confirm which axles your travel trailer uses,…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…