Is Draw Tite Hitch # DT23MR Compatible with 2021 Nissan Rogue SL Hands Free Liftgate

Question

Question:

Hello, I have a 2021 Nissan Rogue SL AWD and I was curious if this hitch was compatible with the kick power gate?

asked by: Tyler

0

Expert Reply:

The Draw Tite hitch part # DT23MR that you referenced is a confirmed fit for your 2021 Nissan Rogue and also is compatible with the hands free liftgate you have as well. Basically you'd just have to kick to either side of the hitch opening and you'd be set.

expert reply by: Jameson C

0

Answer 1

You will still be able to use the hands free lift gate sensor on your 2021 Nissan Rogue once the Curt Class II Trailer Hitch Receiver #C57HR is installed, but you will need to place your foot on either side of the receiver for the sensor to detect…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 5

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 6

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 7

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 8

Hey Adrian! The higher capacity for the B&W #BW47BR and Curt #C77MJ comes from the construction. The B&W hitch weighs 45 lbs and then the Curt and Trailer Mate #TMT54FR both weigh 32 lbs. The Trailer Mate does sit just a tad higher compared…

view full answer...

Answer 9

Though the Curt # C13409 and Draw-Tite #76271 are nearly identical to each other, there are a few subtle differences. First being where they sit once installed. The will both have the exact same height of 14-1/2 inches, but the Draw-Tite #76271 will…

view full answer...

Answer 10

It sure is Rob, and congrats on the new SUV. The Oris Trailer Hitch with Detachable Hitch Receiver item #TS76VR is definitely comparable to the Stealth Hitches item #SH87FR. It's got the same kind of removable receiver that works great with a…

view full answer...

Answer 11

Hi John! We definitely have hitches available for your 2026 Lexus RX350h and the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #e29ZV is a great option. The matte finish makes our hitches blend in better than…

view full answer...

Answer 12

Hey Aaron, great question! The Trailer Mate Trailer Hitch Receiver #TMT67FR is definitely a budget friendly option for a hitch on your 2026 Highlander. This is basically the economy line from Curt. The welds are a little different (but will still do…

view full answer...

Is Draw Tite Hitch # DT23MR Compatible with 2021 Nissan Rogue SL Hands Free Liftgate

Continue Researching