The Replacement Track Nut # 853-2106 is Sold Individually

Question

Question:

Is the price shown for one 1 track nut or multiple pack

asked by: John S

0

Expert Reply:

The Replacement Track Nut # 853-2106 is sold individually.

expert reply by: Jameson C

0

Answer 1

Hello Sam, thanks for reaching out. The Replacement Track Nut #853-2106 is designed to work with the Thule Tracker rails, as well as most OEM roof rails. I am not sure exactly what Thule rails you have but I can provide dimension of the track nut for…

view full answer...

Answer 2

Here are the 2 different mounting options for installing the Batwing and Foxwing Awning Relocation Kit #RR31102. You can change the orientation of the brackets so that the awning will either hang higher or lower depending on your application.

view full answer...

Answer 3

Tire designations ST205/75D14 and ST205/75R14 are both for special trailer tires with a 205mm width, 75-percent aspect ratio and that fit a 14-inch wheel. The difference between them is the tire's type of construction. The ST205/75D14 tire is a…

view full answer...

Answer 4

The Track nut #853-2106 that you referenced will also work on the TK1 roof rack fit kit so it would be exactly what you would need.

view full answer...

Answer 5

The correct fit kit to use with the Thule Feet part #TH460R and your current Evo Square bars like part #TH712500 is actually the part #THKIT3101 for your Leer camper shell roof rack tracks.

view full answer...

Answer 6

First of all, that's an awesome off-road trailer, thanks for the photo. As for the 60" Thule Roof Mounted Top Rack System #THTB60, it has tracks which we have measured before and found the inner track to be 0.8" wide and the top opening…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

The Replacement Track Nut # 853-2106 is Sold Individually

Product Page this Question was Asked From

Continue Researching