Towing Mirror Compatibility For 2019 Ram 1500

Question

Question:

The screw down knolb that holds the mirror on,doesn't prevent the mirror from sliding off.Is there some way to hold it on so it want come off so easy.What can l do?

asked by: Daniel W

0

Expert Reply:

The CM11401 only fits the 2019 Ram 1500 Classic so that's why you're having this issue. The CIPA Custom Towing Mirrors - Slip On - Driver Side and Passenger Side Item # CIP98MR is a confirmed fit for all models.

expert reply by: Kevin C

0

Answer 1

Between the CIPA Custom Towing Mirrors #CIP98MR and the K-Source Snap & Zap Custom Towing Mirrors #KS80730 for your 2020 Ram 1500, I prefer the K-Source Snap & Zap Custom Towing Mirrors #KS80730. The reason I prefer the K-Source Snap &…

view full answer...

Answer 2

You will absolutely be able to remove the #CM11400 after you're done towing, they're meant to be removed. The video I've linked for you shows how they're installed. These mirrors are a fit for the 2020 Ram 1500 classic. If you have…

view full answer...

Answer 3

What you'll want to do is refer to your instructions for the proper torque specs. For example, the instructions for the 5.2K - 6K Kodiak Disc Brake Kit #K2HR526D call for the brake mounting flange to be welded to the spindle and then the caliper…

view full answer...

Answer 4

I apologize for any confusion on what the proper torque specs are for 1/2 inch lug nuts on trailer wheels. I attached a picture of a chart to the right that details what the proper torque specs are for a trailer wheels lugs based on lug size, wheel…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hey Micah! Pacbrake has actually been around for a long time, more than 60 years. We have had customers ask for these air bags in the past, and we've seen them on vehicles coming in. Until now, Firestone has been the go to since their quality is…

view full answer...

Answer 10

Hey Robert, the Access tonneau cover part #A24AU can work with a ladder rack but it has to be one that attaches to the top of the bed rails and not one that wraps around them like the Yakima Overhaul. For a ladder rack that installs like that the…

view full answer...

Answer 11

Hey Kathryn, what specifically on the Blue Ox Alpha are you needing to replace? Unlike Roadmaster they don't have as many replacement parts but you can contact them about getting yours rebuilt but that's just not something we can help with.…

view full answer...

Answer 12

Hey Terry, you’re likely not doing anything wrong. The Force #PA96VR has wide 6-1/2” tires that give great traction, but they don’t pivot sharply. For tight angle turns, it helps to alternate between forward and reverse, “walking” the tongue in…

view full answer...