Comparison Between Draw-Tite 76025 and EcoHitch 306-X7253 for 2015 Honda Odyssey
Updated 04/30/2021 | Published 04/29/2021 >
Question:
What is the difference between this 76025 hitch and the ecohitch hidden trailer hitch receiver? The info says that 87 prefer this other hitch and in trying to determine whats the difference and if I need to spend the extra money.
asked by: Mark A
Expert Reply:
The primary difference is a matter of numbers.
When installed, the Draw-Tite Class III # 76025 will sit so the inside top edge of the receiver tube sits about 13 inches above the ground, and the receiver tube will sit under the bumper so that the hitch pin hole is recessed under the vehicle by about 5 inches.
The EcoHitch # 306-X7253 inside top edge of the receiver will sit about 14 inches above the ground and the hitch pin hole will be recessed by about 4 inches. In other words, the EcoHitch will sit about an inch closer to the bumper in height and recessed behind the rear face of the bumper 1 inch less than the Draw-Tite. Both hitches have the same capacity.
In my opinion, the 1 inch of extra ground clearance and the fact that the face of the receiver will be 1 inch closer to the back of the bumper doesn't justify the price difference. Both hitches would be nicely concealed, so I'd personally save a few bucks by going with the Draw-Tite # 76025.
I've linked to install videos and have provided side-by-side comparison photo showing both hitches installed.
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Search Results: draw~tite max~frame trailer hitch receiver ~ custom fit ~ class iii ~
- Q&A: Recommendation for Mounting Trailer Wiring 4-Way to 2016 Honda Odyssey
- Q&A: Is Torque Wrench Needed When Installing Draw Tite Trailer Hitch
- Shop: Thule Camber Bike Rack for 4 Bikes - 1-1/4" and 2" Hitches - Tilting
- Video: Curt T-Connector Vehicle Wiring Harness Installation - 2015 Honda Odyssey
- Shop: Brake Controller
- Q&A: Rear Bumper Clearance for the Draw-Tite # 76025 on a 2012 Honda Odyssey
- Shop: Transmission Cooler
- Q&A: Brake Controller, Hitch and Ball Mount Recommendation for 2017 Honda Odyssey
- Q&A: Recommended Trailer Hitch And Wiring Harness For 2016 Honda Odyssey
- Q&A: Recommended Mounting a 7-Way Trailer Connector on Hitch with Hidden Crossbar
- Shop: Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class III - Efficient
- Shop: Curt Easy Mount Bracket for 4- or 5-Way Flat and 6- or 7-Way Trailer Connectors - 2" Hitch
- Shop: Replacement Hardware Kit for EcoHitch Trailer Hitch
- Shop: Replacement Hardware Kit for Trailer Hitches
- Article: Rust Prevention
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer hitch
- Search Results: trailer wiring
- Video: Feature Breakdown: Universal Installation Kit for Trailer Brake Controller
- Article: Trailer Wiring Diagrams
- Shop: Suspension Enhancement
- Video: The Low-Down on the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Search Results: trailer tires and wheels


