Replacement Bearing Kit for a Lippert 3500 Pound Axle

Updated 04/22/2021 | Published 04/20/2021

Products Featured in This Question

Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle

(3078)

$19.79

Replacement Trailer Wheel Bearing - L44649 - Qty 1

(2211)

$24.57

Replacement Trailer Wheel Bearing - L68149 - Qty 1

(2211)

$20.34

Question:

Im looking for the bearing components for my Keystone Bullet 277BHSWE, is this the correct set? I crawled up under the unit and the axle is the Lippert Components 3500 lbs axle Item # V000112758 Looking for the following Inner and outer bearings Inner and outer races Bearing seals Cotter pin size or are these standard? Thanks in advance for the help with my new adventures as an RV tech.

asked by: Matt

Expert Reply:

From what I could find out about the Lippert 3,500 pound axles, they use the inner bearing # L68149 and outer bearing # L44649, so the Bearing Kit # BK2-100 will be the correct bearing replacement kit for your needs. The included cotter pin and tang washers are pretty standard and should not cause any issues.

I should note that it is best to double check the bearing numbers when a hub is removed, however. These numbers can become worn off over time, so you can also measure the inside diameter of each to make sure as well. The # L68149 will have an inner diameter of 1.378 inches and the # L44649 will have an inner diameter of 1.063 inches.

expert reply by: Lazer S