Replacement Brake Actuator for Titan Ultra 70 Surge Brake

Question

Question:

Is there a replacement for the titan ultra 70 master cylinder 4819200 or a replacement for the complete titan ultra 70 actuator?

asked by: Marti

0

Expert Reply:

A great replacement would be the Dexter DX7.5 Drop-N-Go Brake Actuator # 099-175-20 for disc brakes.

If you have drum brakes the Dexter DX7.5 Drop-N-Go Brake Actuator # 099-175-00.

There are currently no replacement master cylinders available for your actuator.

expert reply by: Bud M

0

Answer 1

I have attached for you below a photo which shows the bolt pattern for the Demco Hydraulic Brake Actuator part #DM72VR.

view full answer...

Answer 2

Correct; since the trailer is currently empty, there is going to be some hopping of the wheels, and it would not have to do with the install of the Dexter DX7.5 Drop-N-Go Brake Actuator - Drum Brakes - 2" Ball - Zinc Plated - 7,500 lbs…

view full answer...

Answer 3

You're certainly not the first person to ask about the Atwood 85739 master cylinder but those replacement parts are simply no longer available which means your best option truly is to replace your actuator. I completely understand this isn't…

view full answer...

Answer 4

What a lockout on a hydraulic brake coupler does is prevent the brakes from applying when you back the trailer. An electric lock out is tied into the reverse lamp circuit on the vehicle so that when the vehicle is shifted into reverse the solenoid in…

view full answer...

Answer 5

The Brake Actuator with Manual Lockout - Bolt On - Drum - 2" Ball - 7,500 lbs #T63FR is a great replacement for the discontinued Ultra 70. This has a manual lockout compared to the electric lockout of your previous coupler. You can choose to add…

view full answer...

Answer 6

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 7

The Demco Hydraulic Trailer Brake Actuator part #DM72VR should be a direct replacement for the Atwood 61101 Brake Actuator that you have now. This newest updated it rated at 7K instead of 6K. This is a bolt on option that mounts on 3" centers.…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Replacement Brake Actuator for Titan Ultra 70 Surge Brake

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching