Replacement Latch for SportRack Explorer Cargo Box

Question

Question:

the part 03347 is there a universal part that can be used in its place?

asked by: Denise H

0

Expert Reply:

I am not aware of a universal replacement latch. To my knowledge, only the # 03347 will work as a replacement for the SportRack Explorer, Karrite 7251 and Sears X roof cargo box.

expert reply by: Mike L

0

Answer 1

We do have the replacement latch for your Karrite Voyager cargo box, which is the following part number: - Replacement Latch for SportRack Explorer Cargo Box #03347 So that will work to replace your latches but we do not have the key, unfortunately.

view full answer...

Answer 2

We do in fact have the replacement hardware for your Sears X-Cargo carrier. You will need the Replacement Hardware Kit for Searsbox Cargo Box #TH05603 which includes everything you need to get your Sears X-Cargo back on the road. No drilling would be…

view full answer...

Answer 3

You are correct, the Karrite Explorer and Sportrack Explorer are the same cargo box. We do offer a few individual replacement parts for this product like the Replacement Latch #03347 referenced in your question. I recommend the SportRack Replacement…

view full answer...

Answer 4

We do have replacement latches for the Sears X-Cargo boxes with the part #03347.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Replacement Latch for SportRack Explorer Cargo Box

Featured Help Information

Miscellaneous Media

Continue Researching