Front of Housing to Edge of Fill Cap Dimension of Dexter DX7.5L A-60 Brake Actuating Coupler
Updated 04/15/2021 | Published 04/07/2021
Question:
Im looking for a replacement actuator for Tie Down Model 66 but want to find one that has a good location to install a sticker for the Ford Pro Backup Assist feature. Can you tell me the distance from the center of the ball to the fill cap? Is this distance at least 13?
asked by: Mike D
Expert Reply:
The front of the housing to the edge of the fill cap closest to the front of the coupler is 7-7/8 inches, as shown in the provided photo. You'd be better off mounting the sticker on the top or side of the trailer tongue behind the actuating coupler. You wouldn't want to apply the sticker over the junction between the housing and the portion of the actuator that modes, as it would destroy your sticker.
(click to enlarge)
Product Page this Question was Asked From
Dexter DX7.5L A-60 Brake Actuator with Fill Cap - Bolt On - Drum - 2" Ball - Zinc - 7,500 lbs
- Brake Actuator
- Surge Brake Actuator
- Farm Trailer
- Boat Trailer
- Construction Trailer
- Travel Trailer
- Utility Trailer
- Bolt-On
- 7500 lbs GTW
- 2 Inch Ball Coupler
- 3 Inch Channel Tongue
- Drum Brakes
- No Lockout
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Dexter Zinc-Plated Brake Actuator - Disc - Multi-Fit Ball - Bolt On - 7,000 lbs
- Shop: Demco Hydraulic Brake Actuator - Drum - Zinc - 2" Ball - 7,000 lbs
- Video: Checking Out the Demco Hydraulic Brake Actuator w/ Electric Lockout
- Q&A: Options For Replacing An Atwood AT82543 Surge Brake Actuator
- Q&A: Solution For Pushing Trailer Without Brake Actuator Lockout With Front Hitch Uphill
- Q&A: Where Does The Manual Lockout Key Attach On The Titan Brake Actuator # T4500600?
- Q&A: Titan T4500600 Brake Actuator Dimensions
- Shop: Dexter DX7.5L A-60 Brake Actuator with Fill Cap - Bolt On - Drum - 2" Ball - Zinc - 7,500 lbs
- Shop: Dexter Surge Brake Actuator - Disc - Elec Lockout - 2" Ball - Zinc - 7.5K - 3" x 5"
- Shop: Dexter DX7.5 Drop-N-Go Brake Actuator - Drum Brakes - 2" Ball - Zinc Plated - 7,500 lbs
- Shop: Dexter Brake Actuator with Manual Lockout - Bolt On - Drum - 2" Ball - 7,500 lbs
- Shop: Demco DA86 Trailer Brake Actuator - Drum - Zinc - 2" Ball - 8,600 lbs
- Q&A: Replacement for Atwood 61101 Brake Actuator
- Search Results: trailer hitch
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Video: All About the Demco Hydraulic Brake Actuator-DM72VR
- Video: What to Know About the Demco Hydraulic Brake Actuator-DM72VR
- Shop: Trailer Wiring
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Search Results: trailer tires and wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: What to Know About the Demco Hydraulic Brake Actuator w/ Electric Lockout
- Search Results: trailer wiring
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Shop: Suspension Enhancement
- Article: How to Measure for Trailer Hitch Drop
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: Brake Controller
- Search Results: trailer jack
on Brake Actuator
