Replacement Bolt and Knob for the Thule Spare Me Bike Rack

Question

Question:

Does the bolt fit a Thule Spare Me rack?

asked by: Lucia A

0

Expert Reply:

We have what you need here.

First, though, the Locking Knob with Bolt for SportRack Single-Arm, Hitch-Mounted Bike Carriers, part # SR0018, is not compatible with the Thule Spare Me Bike Rack, part # TH963PRO.

The correct bolt for that bike rack is the Replacement Carriage Bolt for Thule Spare Me Spare-Tire-Mounted Bike Carrier and Ski Carrier, part # 915-0655-11.

If you need the knob as well, then use the Replacement Arm Knob for Thule Spare Me Bike Carrier, part # 753-0737-10.

expert reply by: Kef G

0

Answer 1

If you are looking for replacement parts for your Thule Spare Me, part #TH963PRO, we have them here. I don't know exactly which parts you need, so below is a list of parts: Replacement Washer - part #951081654 Replacement Carriage Bolt - part…

view full answer...

Answer 2

This Replacement Arm Knob for Thule Spare Me Bike Carrier #753-0737-10 that you referenced is threaded, so basically it is the nut. Yes, we do carry the Replacement Mounting Carriage Bolt #915-0880-11.

view full answer...

Answer 3

I checked on the thread size on the replacement knob, #753-0737-10, and it was 8mm. This knob is the one on the side of the Spare Me bike rack where the arms pivot. The matching carriage bolt is #915-0880-11

view full answer...

Answer 4

The bolt that you are looking for is the Replacement Mounting Carriage Bolt, #915-0880-11. This is an M8 x 80mm bolt that works with the arm knob on the Thule Spare Me bike rack to secure the arms to the body of the bike rack.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 10

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

From what I can find the Norcold N306.3 fridge has a 2.7 cu ft capacity and is 20-1/8" wide and 26" tall. The most similar option we can offer is the 3.2 cu ft Everchill RV Mini Refrigerator #324-000111. The #324-000111 measures…

view full answer...

Replacement Bolt and Knob for the Thule Spare Me Bike Rack

Products Featured in This Question

Continue Researching