What Wheel Bearing Fits a Timken 07204 Race With a 1 Inch Axle

Published 04/05/2021

Products Featured in This Question

Bearing Kit with Grease Cap for 1" BT8 Spindle, L44643 Inner/Outer Bearings, 34823 Seal

(3438)

$21.29

Trailer Hub and Drum Assembly - 2K Axles - 7" Diameter - 5 on 4-1/2 - L44643 - Pre-Greased

(1284)

$81.54

Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - Pre-Greased

(1052)

$43.43

Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased

(1479)

$49.50

BT8 Spindle for 2,000-lb Trailer Axles - 1-3/8" Diameter

(73)

$38.07

Question:

What Wheel Bearing Fits a Timken 07204 Race With a 1 Inch Axle

asked by: Jimrenkenberger R

Expert Reply:

From what I could find, the Timken 07204 Race has an outer diameter of 2.047 inches. The race that come with # DL21792 would have an outer diameter of 1.980 inches. This would be the closest option we have available.

I can suggest a few replacement hubs that fit the 1 inch axle, however. If your wheels have a 5 on 4 1/2 bolt pattern, you would need either # AKHD-545-2-1K or # AKIHUB-545-2-1K. If you have a 4 on 4 bolt pattern, you would need # AKIHUB-440-2-EZ-1K. You can verify the bolt pattern by measuring from the center of one lug bolt to the center of the lug bolt right next to it. The 5 on 4 1/2 pattern would measure at 2 5/8 inches.

With these not being exact fits for you Timken Race, it is always a good idea to verify a few things before moving forward. The Spindle # TRU59FR is what all 3 hubs would fit on and shows all the measurements needed to confirm their fitment on your axle.