2020 R-Pod Forest River 191 Lift Kit to Raise Suspension

Question

Question:

I need to add a lift to my travel trailer and need some assistance identifying the correct lift. Can you confirm which one I will need? The posting date on the trailer is 7/18/19. The frame says it’s for R-Pod models 189/190/191.

asked by: Michael D

0

Expert Reply:

Since your 2020 R-Pod 191 has a 3,500 lb Lippert axle the correct lift kit you'd need is the part # LC270682 which will give it a 3-1/2 inch lift.

expert reply by: Jameson C

0

Answer 1

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 2

Hey Rob, for your 2021 Jeep Grand Cherokee I would recommend the Prodigy P3 part #TK28ER which comes with a custom fit harness designed for your Grand Cherokee. The P3 is the nicest controller around due to how easy it is to use and setup and how…

view full answer...

Answer 3

The factory brake controller connector on your 2021 Jeep Grand Cherokee is located under the dash behind the hood latch, as shown in the provided photo. Keep in mind, the connector will only be there if the vehicle has the factory tow package which…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 6

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 7

You're right, the mounting bracket is unique (in a good way) for the Curt TriFlex NEXT Trailer Brake Controller #C24VV. The bracket is smaller and all you do is put the included adhesive tape on the bracket and stick it wherever you like under…

view full answer...

Answer 8

Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…

view full answer...

Answer 9

The Redarc Tow-Pro Liberty #RED24FR is the way to go over the Elite #RED44FR as you get the nicer functions of the Elite at a lower price. The Elite has the ability to be the more preferred proportional style of controller as well as a time-delayed…

view full answer...

Answer 10

Thanks for the information Mike. The Redarc item #RED26CR includes the Tow-Pro Liberty Brake Controller and a custom plug in harness designed for your 2016 Chevy Silverado 1500 so long as your truck came with the factory tow package. You will not…

view full answer...

Answer 11

Hi Larry, I can definitely understand your frustration, and based on your testing, that low voltage at the 7-way is not normal and does point to an issue on the truck side rather than the trailers. Also, thank you for your photo. The good news is you…

view full answer...

Answer 12

Hi Jeff, welcome back and sorry to hear that gave you so much trouble. The Redarc Tow-Pro Link Bluetooth Brake Controller #RED57AR will work on your Silverado. This plugs in-line at the back of your 7-way at the rear of the truck. You can either…

view full answer...

2020 R-Pod Forest River 191 Lift Kit to Raise Suspension

Continue Researching