How Wide Is The etrailer Hitch Pin Alignment Collar e98942?

Question

Question:

How thick is this device? I have narrow clearance between receiver and hitch shaft to place it. Thanks

asked by: BGINNANE

1

Helpful Expert Reply:

I had our warehouse measure the etrailer Hitch Pin Alignment Collar for Bike Racks, Cargo Carriers, and Tow Bars - 2" Hitches # e98942 you were looking at and it is 1-3/16" wide as shown in the included diagram.

As long as you have 1-3/16" clearance between the receiver and the end of the 2" accessory you are using this would be a great fit for you.

I included a video of the # e98942 for you to take a look at.

expert reply by: Samuel C

1

Width Of etrailer Alignment Collar # e98942
(click to enlarge)

Answer 1

For your application I recommend going with the Curt 2 Bike Platform Rack - 1-1/4" and 2" Hitches - Frame Mount - Tilting #C18085 because it is compatible with a Class I hitch like the Curt Trailer Hitch #C11290 for your 2007 Honda Accord,…

view full answer...

Answer 2

The Curt 2 Bike Platform Rack #C18085 comes with the threaded anti-rattle hitch pin, but it does not have a locking option for that rack. There isn't a locking hitch that fits that pin, so I recommend using a cable lock like #CAB-10 or #C23666…

view full answer...

Answer 3

Trailer Hitches can be a little odd the first few times you interact with them, and that's OK because I am here to help. The hitch for the 2016 BMW 5 Series will depend on which model of the five series that you have and if you want to be able to…

view full answer...

Answer 4

Yes, the Swagman Straddler Trailer-Mounted Bike Rack Carrier for A-Frame Trailers #S80503 is designed for this purpose, it does however have a limitation of 100 lbs. The Hollywood Racks #HLY94FR, has a weight of 20 lbs. and rated to carry 2 bikes up…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

Hello Andrew, Well that sounds like quite the fun trip, what state or states will you be traveling through? You're asking a really important question, especially since you're planning a cross-country trip with about 250 pounds of bikes and…

view full answer...

Answer 9

Hey Mike, thanks for the information! The best weight distribution system for your 7,000 lbs Big Tex 70DM car hauler is going to be the Equal-i-zer item #EQ37100ET. This system works with tongue weights between 600 lbs - 1,000 lbs. That's going…

view full answer...

Answer 10

Hi Steve, great question! The bolt spread dimensions on scissor jacks aren’t universal, they can vary a bit depending on the brand and capacity. Most standard RV scissor jacks use a mounting plate that’s roughly 3-1/4" wide with bolt holes…

view full answer...

Answer 11

The Thule Epos #TH99XE will work with a car, truck, SUV, or van. Unfortunately, it will not work with a motorhome or trailer. For a 2-bike rack that can handle heavy bikes and is motorhome compatible I recommend the Hollywood Racks RV Rider Bike Rack…

view full answer...

How Wide Is The etrailer Hitch Pin Alignment Collar e98942?

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching