What is the Distance From Center of Hitch Pin Hole to End of Receiver on EcoHitch X7203

Question

Question:

What is the distance from the center of the hitch pin hole to the face of the hitch?

asked by: J M

0

Expert Reply:

The EcoHitch # 306-X7203 has a distance of 2-1/2" from the center of the hitch pin hole to the end of the receiver and 1/2" from the center of the hitch pin hole to the back side of the receiver tube.

expert reply by: Erik B

0

hitch pin hole to receiver end
(click to enlarge)

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 4

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 5

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 6

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 7

Hey Jason, Great question. When installing the Oris Hitch #RS49VR on your 2022 Model 3, the factory bumper beam does not get reinstalled. The hitch itself takes its place and is designed to provide the structural support needed. If you’d rather keep…

view full answer...

Answer 8

Hi Brian! The Stealth Hitches Hidden Rack Receiver - Custom Fit - 2" #391TES317 is the premium option for your 2022 Tesla Model 3 and would work very well for you. It has plenty of capacity to carry the RockyMounts GuideRail Bike Rack for 3…

view full answer...

Answer 9

Hey Jon! The 2018 E-Series Cutaway does not have a custom fit hitch available. What you need is a universal hitch like the Draw-Tite Ultra Frame Service Body Trailer Hitch #41990-07. This is a Class V hitch with a 2" receiver and a weld-on…

view full answer...

Answer 10

I reached out to my contact at EcoHitch to see if they have seen this issue before with the EcoHitch #306-X7201 on your Tesla and if they have any suggestions. My contact did say that the Tesla rear bumper has quite a bit of tolerance from the…

view full answer...

Answer 11

The Curt Trailer Hitch Receiver #C22UR and etrailer Trailer Hitch Receiver #e56RR are essentially the same exact trailer hitch with the only difference being the paint. The Curt has a glossy black finish, while the etrailer has a matte black finish.…

view full answer...

Answer 12

Any trailer hitch whose receiver tube is positioned below a vehicle's rear bumper is going to reduce ground clearance and approach angle to some degree. The actual clearance lost depends on many factors including wheel/tire size, passenger and…

view full answer...

What is the Distance From Center of Hitch Pin Hole to End of Receiver on EcoHitch X7203

Product Page this Question was Asked From

Continue Researching