Weight Distribution Hitch Recommendation For 12,500 lb Trailer

Question

Question:

I am purchasing a toy hauler that I will need to purchase a weight distribution hitch for. I will be pulling it with my 05 F250. The trailer GCWR is 12,500lbs. The hitch weight is 1150lbs. What size and which WDS do you recommend? Thank you.

asked by: Kevin H

0

Expert Reply:

For a trailer with a gross weight of 12,500 lbs you will need a heavy-duty weight distribution system, and there is one option that will have the needed capacity to ensure it can handle your set-up, which is a hitch from Equal-i-zer:

- Equal-i-zer Weight Distribution System with 4-Point Sway Control # EQ64FR

The reason you'll need this hitch is because it is the only one with the right weight capacities for your trailer, with this Equal-i-zer being rated for loaded tongue weights between 1,200 lbs and 1,600 lbs. Your toy hauler's loaded tongue weight will be in the 12% range, or 1,500 lbs, so it will fall right in line with the ratings of this hitch.

This system uses 4 points of sway control via friction in the spring bars to ensure you never have to worry about your trailer swaying. It also uses clamp-on brackets so you won't have to drill along your trailer frame, and allows you to back up with the system on, unlike others which require removal of the hitch to do so. This system comes with everything you need for installation though it is recommended you use thin-walled socket # ALL643216 to help install the hitch ball.

The only other thing to note is that the Equal-i-zer does come with a shank for a 2-1/2" hitch, so if your F-250 has a 2" hitch you would need a different shank, the Reese Weight Distribution Shank # RP54998.

I have added a link below to a video review for you to check out as well of the Equal-i-zer Weight Distribution System with 4-Point Sway Control # EQ64FR.

expert reply by: Kyle S

0

Answer 1

Hello George, Thanks for writing in! I took a look at your Hideout 242LHS and saw it has a GVWR right around 7,650 lbs. When you get it loaded up for a trip, you’ll want your tongue weight to fall in that 10–15% range, which puts you roughly between…

view full answer...

Answer 2

In the video you're referring to of the 2015 Ram 3500 we installed the Prodigy P3, part #90195, simply because the customer wanted one. He wasn't happy with the performance of the factory integrated brake controller on his truck and he had…

view full answer...

Answer 3

Hey Forest! You aren't going to get the clearance you need from moving to the Heavyweight. Even if you did, that system is going to be overrated so you wouldn't want to use it with your trailer. You're better off sticking with the…

view full answer...

Answer 4

Since tongue weight is approximately 10 to 15% of the trailer's fully loaded and ready to tow weight, let's start out with the premise that your Imagine 2500 RL has a tongue weight between 800 and 1100 lbs. In that case, I can highly…

view full answer...

Answer 5

It looks like your 2022 Forest River Rockwood 8337RL tops out at 11,00 lbs. Weight distribution systems are based off of a trailer's tongue weight. The tongue weight is typically between 10% and 15% of your trailer's total weight. This means…

view full answer...

Answer 6

Since you are going to use a weight distribution hitch I recommend the Equal-i-zer Weight Dist Shank #EQ90-02-4600 with their Equal-i-zer Weight Distribution #EQ37061ET. The shank is extended to 18" versus the standard 12" long allowing it…

view full answer...

Answer 7

Yes, the Redarc Tow-Pro Elite #RED44FR is compatible with your 2014 GMC Sierra 1500. The only other thing you need to complete the installation is the Plug-In Adapter #331-TPH-010. This plugs into the black electric junction box, located under the…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Weight Distribution Hitch Recommendation For 12,500 lb Trailer

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching