Hitch for 2020 Chrysler Pacifica With Most Ground Clearance  

Between the Curt Trailer Hitch item #C29UR and item #C13383, I recommend the item #C29UR because it doesn't hang down as much. Both hitches are confirmed to fit the 2022 Chrysler Pacifica Hybrid and have identical 4,000 lbs towing capacities.…

Thanks for reaching out! I recommend going with the Curt Hitch Receiver #C65CR for a standard hitch or the Hidden Hitch by Draw-Tite Trailer Hitch Receiver #DT46GR if you want the option to remove the receiver for a complete OEM look on your 2022…

Installation of the etrailer Hitch part #e98903 on your 2020 Chrysler Pacifica still allows for the hands free liftgate sensor to work but may limit the range of the sensor which may result in you having to put your foot near or around the hitch. To…

I checked with the trailer hitch manufacturers and can confirm there is one trailer hitch that is a fit for the 2021 Chrysler Pacifca, which is from Curt: - Curt Trailer Hitch Receiver #C29UR This hitch (which does fit the 2020 model as well) has a…

The hitch that I recommend for your 2021 Chrysler Pacifica Hybrid is going to be the Draw-Tite Max-Frame Trailer Hitch Receiver #76046-SK. This hitch has a bolt-on, no-drill installation and will provide you with a 2" receiver opening which is…

For your 2022 Chrysler Pacifica Hybrid I recommend the draw tite #76046-SK. This has been confirmed to fit hybrid models. I prefer this hitch over the others because it can hold more tongue weight (675 lbs) than any other hitch we offer. This will be…

For your 2019 Chrysler Pacifica Hybrid I highly recommend the Draw-Tite Max-Frame Trailer Hitch Receiver #76046-SK because of its hidden-crosstube design (the only hitch with this style available for your Hybrid model). This hidden design means that…

For a 2023 Chrysler Pacifica Hybrid I recommend the Curt Trailer Hitch Receiver #C29UR. The cross tube of this hitch sits higher up for a more hidden look so all you'll see is the receiver tube. It has a 4,000lb GTW and 400lb TW capacity, but…

The Curt #C29UR and the Draw Tite part #76046-SK are definitely the most hidden options for your 2021 Chrysler Pacifica Hybrid but the edge goes to the Curt in terms of least visible since the safety chain loops are horizontal and smaller. I attached…

The Curt Trailer Hitch item #C29UR for your 2022 Chrysler Pacifica is the same hitch as the 13466. There are no differences. This hitch is custom fit and bolts to your Pacifica with included hardware. If you are planning on towing with your Pacifica…

Curt has confirmed that their 13466 Class III hitch, which we offer as part #C29UR is a confirmed fit for the 2021 Chrysler Pacifica, hybrid model only. I've even checked their website to confirm it for you. You can look over the installation…

That is correct. To install the Curt Trailer Hitch Receiver #C29UR on your 2018 Chrysler Pacifica Hybrid you will need to remove two the exhaust hangers from the rubber isolators, and support the exhaust to make sure it does not get damaged. Next you…