Replacement Antenna For Furrion Vision S Back Up Camera

Question

Question:

Hello Does the RVS-WT03 back up camera antenna fit a Furrion vision S. F0543TADS Mine got damaged

asked by: Albert M

0

Expert Reply:

I have another option for you, but the Replacement Wireless Antenna for RVS Wireless Backup Camera Systems # RVS-WT03 you were looking at is designed for the RVS backup cameras and will not fit your Furrion Vision S camera.

Instead you will need the Replacement Antenna for Furrion Vision 1, 2, and S Wireless RV Camera Systems # 772577 which my contact at Furrion confirmed will work with the back up camera included in your Furrion Vision S F0543TADS.

I included a video of the # 772577 for you to take a look at.

expert reply by: Samuel C

0

Answer 1

Yes we do have the replacement antenna for the #RVS-2CAM with the part #RVS-WT03.

view full answer...

Answer 2

Atwood is no longer in business so you'd have to switch over to a new brand in order to get what you need. We currently only carry the RV Propane Gas #RS44FR (white #RS64FR) which comes with two different trims (large: 7-1/4" long x…

view full answer...

Answer 3

No, they don't because Dometic is concerned with debris filling up the screens and blocking the intake of air to the unit making it less efficient. You can try to attach some screening like item #UF63FR but you'll want to make sure you keep…

view full answer...

Answer 4

Yes, when installing the knob for the Redarc Tow-Pro Liberty Brake Controller item #RED24FR you will want to remove any extra material behind the insert. I am happy the video was able to help you out. I have linked a couple of pictures from the video…

view full answer...

Answer 5

Trailer wheel bearings are specific to the spindle that is installed on the axle that is on your trailer. You will need to safely support the trailer, remove the wheel and tire, remove the grease cap, remove the cotter pin and washer that secures the…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yes, David you are correct. The Redarc Tow-Pro Liberty Brake Controller w/ Custom Harness item #RED82CR is exactly what you need. Since your 2024 Toyota 4Runner came with a 7-way connector, the plug and play adapter included with item #RED82CR will…

view full answer...

Answer 8

Hey Matt, assuming the frame width of your trailer is also 56 inches wide the overall width of it would be with the Timbren Axleless kit part #TASR35HDS06 a total of 82 inches.

view full answer...

Answer 9

Hey Tony, Definitely smart to verify the right kit for your 2024 Toyota 4Runner, and I'll go ahead and list out exactly what you need: - Redarc Tow-Pro Liberty Brake Controller w/ Custom Harness #RED82CR This comes with the controller, wiring…

view full answer...

Answer 10

Hello Erik; the Redarc Tow-Pro Trail Brake Controller w/ Custom Harness #RED74UR is a new brake controller from Redarc. It is not the Elite or the Liberty with the main difference being the SwayStop feature. SwayStop is designed to be used when the…

view full answer...

Answer 11

All the brake controller needs to sense a trailer connection so that you can test it is a slight amperage draw on the output circuit. For that you can use a circuit tester like the part #PTW2993 with one pin grounded and the other on the output pin.…

view full answer...

Answer 12

Hey Mark, thanks for reaching out, and good question. Both the Redarc #RED98CR and #RED82CR are correct for your 2022 Toyota 4Runner. The only difference is the #RED82CR comes with the universal mounting panel for the knob, while the #RED98CR does…

view full answer...

Replacement Antenna For Furrion Vision S Back Up Camera

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching