Replacement Installation Hardware Kit for Curt 13077 Class III Hitch

Question

Question:

Hi guys, https://www.etrailer.com/p-13077.html I have the 13077 hitch, but lost the hardware installation kit washers, bolts and rivets. Can you sell it separately? Thanks!

asked by: Serge B

0

Expert Reply:

You'll need our RHK replacement hardware kit. Use the provided link and go to the product description page, type in '13077' in the provided field and choose 'Curt' from the nearby drop down menu. This will get you the necessary hardware to install the # 13077 hitch.

I've linked to the installation instructions, as well as to an install video.

expert reply by: Mike L

0

Repacement Hardware Kit for Curt Receiver Hitches
(click to enlarge)

Answer 1

Hi Danny! The Draw-Tite #76288 and Curt #C85VV hitches for your 2022 BMW X5 are going to be pretty similar to each other. There are a few differences though, and I have those listed below: Draw-Tite #76288 Towing Capacity: 7,200 lbs Tongue Weight…

view full answer...

Answer 2

Although the Draw-Tite Trailer Hitch, part #75600, and the Curt Trailer Hitch, part #13077, are both great hitches that both have a 6,000 lb max Gross Trailer Weight and a 600 lb max Tongue Weight, I recommend going with the Draw-Tite #75600. The…

view full answer...

Answer 3

If your Jeep JL has a 3-wire system then you will actually attach the red wire from the Curt Upgraded Circuit Protected Powered Tail Light Converter w Hardwire Kit #C59496 to the brake light circuit. The only time you will ground the red wire is if…

view full answer...

Answer 4

Hey Mike, for your 2018 BMW X5 the Curt hitch part #13077 would be a really great option that is mostly hidden and has great towing capacities. Only the hitch opening hangs below the rear bumper so it's mostly out of sight. Or if you'd prefer…

view full answer...

Answer 5

Though the Curt # C13409 and Draw-Tite #76271 are nearly identical to each other, there are a few subtle differences. First being where they sit once installed. The will both have the exact same height of 14-1/2 inches, but the Draw-Tite #76271 will…

view full answer...

Answer 6

A chrome finish ball #C40036 is going to look good but it will not be corrosion resistant. A ball with a machine finish like #C40087 , is going to have about the same corrosion resistance. In terms of performance they will wear at about the same rate…

view full answer...

Answer 7

The span you refer to on the etrailer Trailer Hitch Receiver Lock for 2" Hitches #e98880 is the usable length of the pin. To properly measure for this, you can measure the outside walls of your hitch at the pin hole. If you measured, and got…

view full answer...

Answer 8

First thing you need to tow a trailer with your 2015 BWM X5 is a trailer hitch like the Curt #13077 which is mostly hidden and had more than enough capacity for your trailer. Next for trailer wiring you'd want the part #119250KIT to provide the…

view full answer...

Answer 9

The Curt #13077 and Draw-Tite #75600 are both at a weight rating where it could be considered a class III or IV. A class III is rated up to 6,000lbs with up to 600lbs of tongue weight. While a class IV is rated higher there is not a specific number…

view full answer...

Answer 10

The integrated locks for your Kuat NV 2.0 Bike Rack like #NV22B will have the key number stamped both on the keys themselves and on the lock cores right above the key slot. The numbers on the keys are pretty small and hard to read but there should be…

view full answer...

Answer 11

I can help you choose between the Kuat Sherpa 2.0 and Kuat Transfer V2, as both are really nice bike racks. Let me start off, since you mentioned 3-bike rack, if that's what you were after you would need the Kuat Transfer V2 Bike Rack for 3 Bikes…

view full answer...

Answer 12

The 1 Bike Add-On #KU57FR allows you to add an additional bike to the Kuat Transfer V2 Bike Racks 1-Bike #KU64FR and the #TSAOB is for the older V1. The easiest way to tell which version you have is look at the shank that slides into the vehicle…

view full answer...

Replacement Installation Hardware Kit for Curt 13077 Class III Hitch

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching