Finding the Correct Spindle Size for Hub
Published 01/20/2021
Products Featured in This Question
Question:
I have a hub that is cast with the number pt581750. I was wandering if you could pull up that number and tell me what spindle goes with it. I have a bad axle and plan to build my own instead of buying one. Thanks
asked by: Chris P
Expert Reply:
From what I could find about your hub, you need the #84 spindle like # TRU84FR which is a round spindle. A more accurate way to figure out the needed spindle size is to first find out the measurements of your bearings. You can also measure the spindles on your damaged axle and match them to the inner diameter of the bearings that fit a #84 spindle.
The matching bearing kit is Bearing Kit for #84 Spindle # BK2-100. This matches L44649/L68149 Bearings which is what I believe your hub uses, but double-check with some measurements to be sure.
Product Page this Question was Asked From
#84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter
- Trailer Spindles
- Standard Spindle
- Without Flange
- L68111
- 1-3/4 Inch Diameter
- Round
- For 3500 lb Axle
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Looking For Replacement MasterPro 581750 Hubs On A Yacht Club Pontoon Trailer
- Q&A: Replacement for UFP HD1377 Trailer Hub/Drum
- Q&A: Replacement Hubs and Brakes for UFP HD-1877-10
- Q&A: Replacement Hub & Drum For UFP HD-1377-10 & Hydraulic Brakes For Boat Trailer
- Q&A: Trailer Hub/Drum to Replace Damaged UFP HD-1377-10
- Shop: Hydraulic Trailer Brake Kit - Uni-Servo - Free Backing - 10" - Left/Right Hand - 3,500 lbs
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-3/4 - Pre-Greased
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Q&A: How to Determine Which Replacement Hubs Will Fit Spindle
- Q&A: Replacement Brake Assembly for Axletek 44-GG
- Article: Most Popular Wheel Bearings
- Article: What To Look For When Buying Ratchet Straps
- Article: Gooseneck to 5th Wheel Adapters
- Article: Trailer Lighting Requirements
- Article: How to Install a Brake Controller on Chevrolet / GMC 1999-2006 Pickups
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Measure Your Trailer Wheel Bolt Pattern