Can Other Manufacturers Hitch Locks Be Used With Thule Bike Racks

Question

Question:

Woult it fit Thule 2”trailer hitch. Original Thule lock is very expensive.

asked by: Marie

0

Expert Reply:

The threaded insert in the shank of a Thule bike rack is threaded in such a way so that only their SnugTite # THSTL2 lock will be compatible. The rack manufacturers do this so you'll need to purchase their proprietary hitch locks will work with their products.

expert reply by: Mike L

0

Answer 1

Hey Mario, I've had the chance to test fit the Sport Rack locking hitch pin part #A32022 with a Curt bike rack and found that it worked great so it would for your Curt bike rack #C18085. How do you like the Curt bike rack?

view full answer...

Answer 2

The threads on the SportRack Hitch and Cable Lock - Keyed Alike, item #A32022, are 1/2 inch coarse and the overall length of the bolt is 4-3/4 inches. The cable will fit through a 1/2 inch hole. The bolt does not have grade markings on it, so I…

view full answer...

Answer 3

The Malone AirFlow2 Roof Rack #MPG215 has aero crossbars so depending on your Thule aero box's compatibility with aerobars will be the determining factor of whether this will work. While manufacturers rarely test for cross compatibility, your…

view full answer...

Answer 4

It is up to you if you wanted to cut these Malone bars #MPG216. What I would suggest is getting the 50 inch version #MPG215 so you don't have to cut anything.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Can Other Manufacturers Hitch Locks Be Used With Thule Bike Racks

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching