Are Replacement Parts for the GDC-100 Available

Question

Question:

Hello, Im looking for a replacement part for a GDC-100 brake actuator. Do you have any parts that would replace this?

asked by: Karina R

0

Expert Reply:

I may have a solution for you, but we don't have replacement parts for a GDC-100 actuator. It looks like the GDC-100 is a heavier duty actuator designed to work with disc brakes, so the # T4750820 would be a good option to use as a replacement. This is a higher capacity disc brake actuator with an electric lock out, so it's ideal for a boat trailer that has disc brakes..

expert reply by: Erik B

0

Answer 1

For your Trailrite Boat Trailer I recommend the Demco Hydraulic Brake Actuator #DM72VR. This actuator is zinc coated to resist corrosion and uses a 2" ball coupler with EZ-Latch mechanism for easier hook ups. It will mount similar to your old…

view full answer...

Answer 2

Thanks for the photo! In order to replace the surge brake actuator, I recommend taking a look at the Titan Zinc-Plated Brake Actuator part #T43397007K. This actuator is zinc plated for corrosion resistance, will work with 1-7/8"/ 2" hitch…

view full answer...

Answer 3

Since the Titan Zinc-Plated Brake Actuator #T4750820 that you referenced has a weight capacity of 12,500 lbs and a tongue weight capacity of 1,250 lbs it will serve well as a replacement actuator for your application. The mounting holes are spaced…

view full answer...

Answer 4

The Titan Actuator part #T4750820 would be a great solution for replacing the GDC 120 you have on your triple axle boat trailer. It has more than enough capacity and is a very reliable actuator.

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The Demco Hydraulic Trailer Brake Actuator part #DM72VR should be a direct replacement for the Atwood 61101 Brake Actuator that you have now. This newest updated it rated at 7K instead of 6K. This is a bolt on option that mounts on 3" centers.…

view full answer...

Answer 7

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 8

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 9

Hey Robert, yes the Kodiak disc brake calipers part #KDBC225DAC that you referenced will replace the Tie Down calipers you have now 46304, they can be used as a left or right hand caliper and does come with ceramic brake pads. If you ever needed…

view full answer...

Answer 10

Hey Wendell! Thanks for getting back to me with all that information! I recommend the Kodiak Disc Brakes - 10" Hub/Rotor item #KOD67FR. These hubs have a corrosion-resistant Dacromet finish that stands up great in both freshwater or saltwater.…

view full answer...

Answer 11

Hey Larry! If your DA66B is the drum brake model the Demco Hydraulic Brake Actuator #DM72VR is the direct replacement. Since you were asking about the Hydraulic Brake Kit #AKFBBRK-7-D as well I'll assume that is correct. The brake mounting…

view full answer...

Answer 12

For a disc brake model with an electric reverse lockout solenoid you can use #099-175-20.

view full answer...

Are Replacement Parts for the GDC-100 Available

Product Page this Question was Asked From

Continue Researching