Breaking Down the Fulton Single Axle Trailer Fenders with Top and Side Steps Video

I'd be happy to help you with that. For starters, the #F008584-2 fenders you'd looked at are designed for 14 inch wheels, you'd be better served going with the #F008585-2 which are designed for 15 inch wheels like the ones you have.…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

I looked at many photos of 2005 Jamco horse trailers to see the type of door handles it has and it appears you could have the popular cam type rear door lock like #3057-55 or a side door lock like #PLR3057. We do offer replacement handles for these…

When a trailer's tail light remains on when the vehicle is shut off, this usually indicates some kind of short in the wiring. I first recommend using a circuit tester like #PTW2993 to check the vehicle side connector. You will want to see if…

Since you have checked all of your grounds and tried hooking up your trailers to different vehicles you already went through all of the troubleshooting steps that I would have recommended for you to go through. If your connectors are clean, your…

First, I can tell you that we carry few rims that have an offset. If it did have an offset it would be listed so it looks like the Dexstar Wheel, #AM20021, has a zero offset. Given that it has a zero offset the total width of the rim is 8 inches (7…

Based on your trailer tire size the Fulton Trailer Fenders part #F008585-2 would work very well for you. To see a chart with the fender dimensions see the attached picture.

I do not have instructions, but I can explain how the fender brackets are used. The mounting brackets slide into the underside of the step on either side of the fender with the open end of the bracket facing downward. The fender secures to the…

For a boat trailer, the best finish is going to be galvanized. The Kenda 5.70-8 Bias Trailer Tire with 8" White Wheel - 4 on 4 - Load Range C #AM30120 that you were looking at may work fine, but I don't recommend it for boat trailers since…

There actually is no real difference. They have the same dimensions, fit the same applications, and are both double lip seals. Our part number for the 10-36 is the #RG06-070.

I can definitely help point you in the right direction, but we do not offer a universal fender for a Karavan trailer. Fitment mostly depends on the wheel size. Looking at these different Karavan trailers, it appears some models use a plastic fender…

We carry several trailer fender bracket options you could use to install the Fenders #CE19502-2 which I attached a link to on this page. The most popular option is the larger L-bracket part #CE26061G-2. I attached an install video for these for you…