Can Bearing Buddy Be Used On Trailer With EZ Lube Axles
Updated 12/30/2020 | Published 12/29/2020
Products Featured in This Question
Question:
I have a question about the bearing buddy. Does the zirk fitting on the hub need to be removed to use the bearing buddy?
asked by: Alonza B
Expert Reply:
You are correct that the zerk fitting on your spindle will need to be removed for you to use the bearing buddy, but the great part is the bearing buddy will be able to push grease through the spindle providing grease through the spindle to the inner bearing.
To find the correct bearing buddy you will need to use digital calipers like # PTW80157 to measure the inside diameter of your hub since each bearing buddy is made for a certain sized hub. For example the Bearing Buddy Bearing Protectors # BB2441SS is for hubs with a 2.441" hub bore.
If you can measure you hub and provide that measurement I would be happy to recommend the correct Bearing Buddy for you.
Product Page this Question was Asked From
Bearing Buddy Bearing Protectors - Model 2441SS - Stainless Steel (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 2.44 Inch
- 4400 lbs Axle
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- Bearing Buddy
more information >
Continue Researching
- Q&A: Recommended Bearing Kit for a 3,500 lbs Axle on a Boat Trailer
- Search Results: bearing buddy
- Search Results: grease seal 10 19
- Search Results: bearing buddy model 19b
- Search Results: trailer bearings races seals caps
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Search Results: marine grease
- Search Results: grease seal 10~19
- Search Results: bearing buddies
- Video: What to Know About the Grease Seal
- Video: 4" Carbon Fiber Digital Caliper Feature Review
- Video: All About the Grease Seal
- Shop: Bearing Buddy Bearing Protectors - Model 1980A w/ Auto Check - Chrome Plated (Pair)
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Q&A: What are the Diameters of Bearing Buddy Bras # BB19B, # BB23B, and # BB17B
- Q&A: What Model Bearing Buddy Do I Need for a 1.965" Hub Bore?
- Q&A: How To Choose Correct Bearing Buddy for Tractor Supply Small Utility Trailer
- Q&A: Determining Which Diameter to Measure for Bearing Buddy
- Shop: Replacement Grease Cap for Dexter/Tie Down Engineering Vortex Trailer Hubs
- Shop: Bearing Buddy Bearing Protectors - Model 1968SS - Stainless Steel (Pair)
- Shop: Timken Grease and Oil Seal - Double Lip - I.D. 1.719" / O.D. 2.565" - 473336
- Q&A: Does the Outer Bearing Have to Be Pressed On, On the CE Smith Trailer Idler Hub CE13515?
- Q&A: Bearing, Race and Grease Seal Kit for 3500 lb Axle
- Video: Feature Review Replacement Nut Retainer for 6-191 Jam Nut
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Video: Feature Breakdown: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles
- Video: Review of Dexter Trailer Bearings Races Seals Caps - Bearing Kit 3500LB Axle - DX76ER
- Shop: Trailer Hitch
on Trailer Bearings Races Seals Caps
