No-Drill 5th Wheel Brackets That Fit 2021 Chevy Silverado 2500  

For your 2019 Chevy Silverado 3500, the manufacturer puck system is not available in aftermarket but there is a very similar option to give you the 4 pucks. It is the Reese Under-Bed Rail and Installation Kit for Reese Elite Series 5th Wheel Trailer…

Congratulations on the new truck! I have a few options for you, but unfortunately there is not underbed 5th wheel rails available to mount the Curt A16 5th Wheel Trailer Hitch #C16120 from your Ram to your new 2021 Chevrolet Silverado 2500. There are…

For your 2023 GMC Sierra 3500 you are going to want the Firestone Ride-Rite Air Helper Springs item #F2613. These air bags have a 5,000 lbs load leveling capacity so they will offer plenty of support for your 5th wheel trailer. They are compatible…

Yes, the Adapter Rail for Curt 5th Wheel Hitch's part #C88KR which is a fit for a 2021 Chevrolet Silverado 3500 will work with a Reese 16K 5th Wheel Hitch. They are simply above bed rails so they will work with Curt, Reese, Husky etc. hitches.

The Curt 5th wheel hitch frame mount bracket you'd looked at, part #C16429 are indeed a fit for the 2020 Chevy Silverado 2500. You'll want to use the kit, which includes the bed rails as well which is #C16429-104 for the gloss black bed rails…

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

It sounds like you could have a set of standard fifth wheel rails that most manufacturers use for their fifth wheel hitches to install into. The different manufacturers all make their own brand of rail kit, but they all have basically the same…

A basic rule to go by is that the tongue weight of a 5th wheel trailer is about 20 percent of the gross trailer weight. Based on the 5th wheel trailer dry weight of 13,400 pounds the dry hitch weight is correct at 2,535 pounds. Just under the 20…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…