Does Curt Hitch C60633 Require Removing Exhaust Brackets and Spare

Question

Question:

Hi Is it really necessary to remove the exhaust bracket and spare tire ?

asked by: Peter

0

Expert Reply:

I checked with Curt and the install of the Curt gooseneck hitch # C60633 does require lowering the exhaust by removing the exhaust hangers but there isn't any mention of the spare being removed. It will be easier with the spare out of the way though.

I attached an install video for this for you to check out as well.

expert reply by: Jameson C

0

Answer 1

We offer the Reese 9485 as our own unique part number, #DT89MR, as well as the Curt #C60633 or the B&W #BWGNRK1320 which will all fit. If I personally had to choose between the two, I'd go with the B&W because I prefer the side-latch…

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

Hey Kim, thanks for reaching out. The Firestone Ride-Rite Air Bags with Easy Mount Compressor #F24XV do fit your 2020 Ram 2500 with rear coil springs, but the hang-up is the under-bed gooseneck hitch. On your truck, the air bag brackets and the…

view full answer...

Answer 8

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 9

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Answer 10

Hi Ray! The MORryde GooseTech 5th Wheel to Gooseneck Pin Box for 11.5K to 14K Trailers #MR74MV can definitely be used in a short bed 3/4 ton pickup, like your 2024 Ram 2500. Just be aware that not all trailers have a tapered nose and you may not get…

view full answer...

Answer 11

Hey Patrick, thanks for the measurement. The Travel Door Latch for GE Appliances RV Refrigerator item #GE98FR has mounting holes 1-3/16" on center. It's designed for the 9.8 Cu. Ft. GE Appliances RV Refrigerator with Top Freezer item #GE58FR…

view full answer...

Answer 12

Yes, there is. It is the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit item #BWGNRK1320. This hitch has been recently confirmed to fit the 2025 Ram 2500s. There was some concern about the exhaust being changed from…

view full answer...

Does Curt Hitch C60633 Require Removing Exhaust Brackets and Spare

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching