Tire Chain Recommendation for Toolcat with Snowblower on Paved Surfaces

Question

Question:

What is best for relatively flat driveway. Durable but least damage to paved driveway. 29x10.5-15 Thanks

asked by: Troy

0

Expert Reply:

The ToolCat has a very aggresive tread pattern, so for a flat drive I would recommend working it without chains.

For the best performance, I would recommend going with the Pewag All Square Tire Chains, # PWE3210SC, that you referenced. The square link chains have an edge that will help grip on ice and in heavy snow conditions. These will be likely to mark your drive some.

The in between option is snow cables like Glacier # PW3010C. I suspect these will only give you a bit more traction compared to your tires alone.

I have attached a link to all of the tire chain options that we offer for your tire size for you to check out.

expert reply by: John H

0

Answer 1

Good question, Bill! Kind of surprised we don't have that listed anywhere, but the BulletProof Hitches Aluminum Adjustable 2-Ball Mount - 2-1/2" Hitch - 6" Drop/Rise - 14K #BPH77MR weighs right at 19.5 pounds. This makes it the lightest…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Hi Cory, can you tell me the specific part numbers and which measurements you want exactly? I only see that you looked at some Trimax HD ball mounts, and I want to make sure I'm getting all of the measurements you're looking for and on the…

view full answer...

Tire Chain Recommendation for Toolcat with Snowblower on Paved Surfaces

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching