Video Transcript for Review of Trimax Locks Trailer Hitch Ball Mount - Razor Ultra Max Adj Alum 2 Ball 2-1/2 In - TMX55QR

Hi, everybody. Andy here with etrailer. Let's take a quick look at this TRIMAX Razor Ultra Max adjustable aluminum two-ball mount for your 2 1/2 inch trailer hitch receiver. Now, this is an adjustable ball mount. It's gonna allow you to fine-tune the height of your trailer connection so everything is going to stay level while you're towing. So in this orientation, this is gonna give you about a six inch drop.

And then when you flip this over, you're gonna get about a six inch rise. So you're gonna be able to adjust this in one inch increments. So it's gonna be really easy to dial in the exact height that you're looking for. Now, as you know, aluminum is much lighter than steel. It's going to be a lot easier to handle when you're installing this, or adjusting the height, or even taking it on or off your vehicle.

That can make a big difference if you're moving it around or you just don't wanna deal with a heavy hitch. Another benefit is going to be corrosion resistance. Aluminum does not rust like steel, so it tends to hold up better over time, especially if you're in areas with a lot of rain, snow, or road salt. I'm just showing you how easy this is going to be to get the height adjustment that you're looking for, but I'm also swapping out the ball as well. So you got your 2 5/16 inch and your two inch ball.

And then another nice benefit of this is when you're not using it, you can stow this. So obviously you'll just replace the pin and clip, but this is going to allow you to get that ball platform out of your way so when you are walking behind your truck, you're not going to be banging up your shins when you walk behind your truck. So that stow feature is a great addition. So this is again going to slide into your 2 1/2 inch trailer hitch receiver. And this has a capacity of 20,000 pounds of towing and up to 2000 pounds of tongue weight.

So this is gonna be able to handle most heavy-duty towing jobs. And then just to give you an idea of the size, let me give you some measurements. So measuring from the center of the first hitch pin hole to the center of the ball, about 9 1/2 inches. Moving over to the second hitch pin hole, about 10 1/2 inches. And then from the second hitch pin hole to the end of the shank, about 1 3/4 inches. So in my opinion, this is a great aluminum ball mount. It's gonna give you some adjustability that you're looking for. We do have this available in other ranges of drop and rise as well. Also different trailer hitch receivers. So we also have two inch trailer hitch receiver ball mounts available from TRIMAX as well. And if you don't want aluminum, we have it available in steel. So a lot of options for you to consider. I think that's gonna wrap up our look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.