Replacement Camper Steps for 2017 Grand Design Imagine 2600RB

Question

Question:

I have a 2017 Grand Design Imagine 2600RB Will these steps fit? My mounting space is 27 3/8 inches wide Thanks

asked by: Cliff G

1

Helpful Expert Reply:

Yes, they will fit. The Alumi-Tread Manual Pull-Out Step for RVs - 9" Drop/Rise - 24" Wide - Triple - Aluminum # LC432696 are designed to fit in a mounting area that is 27-1/2" wide x 16" tall x 12-3/16" deep and although there is a 1/8" difference this is going to be within the margin of error and will fit in your mounting area. These Alumi-Tread steps are easy to use and a great choice to replace your old steps.

expert reply by: Erik B

1

Answer 1

A lot of trailer tire blowouts are a result of heat build up that causes the tire to fail. There are several things that can cause too much heat to build up but the main two most likely suspects are overloading the trailer and/or under inflated…

view full answer...

Answer 2

There is no direct replacement for the Duo Therm model 57915.621. You will need to upgrade your entire system. I recommend the Advent Air RV Air Conditioner w/ Air Distribution Box, Start Capacitor, and Heat Strip - 13,500 Btu item #ACM135CH in white…

view full answer...

Answer 3

In order to replace the steps on your 2018 Keystone Cougar 25RES you'll first need to identify your mounting bracket width which are the brackets attached on the trailer that the steps mount inside. The next thing you'll need to do is count…

view full answer...

Answer 4

The correct replacement motor for your Model 28 Kwikee steps manufactued in 2000 is the part #LC379608. Thank you for including the photo, that always makes things easier. I've linked to a product description video featuring the #LC379608…

view full answer...

Answer 5

It is okay to mix and match the Lippert Road Armor #LC696740 with the MORryde 2-1/4" #MR46ZR or 3-1/8" #MR76ZR shackle straps. The MORryde shackles are superior in construction to the Lippert kits we currently carry. MORryde did just…

view full answer...

Answer 6

The Road Armor Shock Absorbing Equalizer Kit part #LC696740 are taller than most other standard equalizers so you'll likely need the longer 3-1/8" shackle straps when using them, the Lippert AP Kit part #LC52SV is a go-to for this as it has…

view full answer...

Answer 7

Hey Shayne, yes the Gen-Y Hitch Nomad 5th Wheel to Gooseneck Pin Box #GY57ND that you referenced would need the included spacers to install in place of a Lippert 1716 pin box as that pin box is 1/2 inch wider. What camper do you have? At this time…

view full answer...

Answer 8

I would be happy to help you figure out the correct TorkLift GlowStep Revolution Scissor Steps for your 2012 Rockwood 8312SS, but unfortunately I do not have a list that has the correct step for your trailer. To determine the correct steps you will…

view full answer...

Answer 9

Hey Steve! I just heard back from Dexter and you have a 3,500 lb axle. For self-adjusting brakes you can use the etrailer Electric Trailer Brakes #AKEBRK-35-SA. If you prefer Dexter brakes then you need the Nev-R-Adjust #23-468-469. For bearings and…

view full answer...

Answer 10

Hey William, we've got you covered! Excellent choice to improve ride quality, my favorite thing about the Firestone Ride-Rite Air Bags #F79XV is the wireless control lets you adjust everything right from your phone. The link will take you to our…

view full answer...

Replacement Camper Steps for 2017 Grand Design Imagine 2600RB

Product Page this Question was Asked From

Continue Researching