Fishing Pole Holder and Crossbars for 2016 Toyota 4Runner

Question

Question:

Hi, Im considering this fishing pole holder https://www.etrailer.com/Fishing-Rod-Holders/Rhino-Rack/RR576F.html?feed=npnandgclid=EAIaIQobChMI9Ibvgc-87QIVBbGGCh0eeAI7EAQYASABEgL9HvD_BwE Does it require cross bars? I think my husbands 4Runner only has the side rails at the top, with nothing across the roof. Would I need this item to make this work?https://www.etrailer.com/p-C18118.html?hhyear=2016andhhmake=Toyotaandhhmodel=4Runner

asked by: Sarah B

0

Expert Reply:

Yes and yes! The Rhino-Rack Fishing Rod Carrier # RR576F needs cross bars to clamp onto. An interesting thing about this one is that it is also the Rhino-Rack Ski and Snowboard Carrier # RR576. We have people that use this for both purposes for different seasons.

As for crossbars, the Curt Roof Rack for Raised Rails # C18118 is a great option. The best thing about these rails are that the cross bars are 2-1/8" wide x 7/8" tall. The Rhino-Rack Carrier # RR576F clamps around crossbars that are 3-3/4" wide x 7/8" tall at the most, so that means these two are a fit!

expert reply by: Evangeline M

0

Sarah B.

12/8/2020

Hi, Im considering this fishing pole holder https://www.etrailer.com/Fishing-Rod-Holders/Rhino-Rack/RR576F.html?feed=npnandgclid=EAIaIQobChMI9Ibvgc-87QIVBbGGCh0eeAI7EAQYASABEgL9HvD_BwE Does it require cross bars? I think my husbands 4Runner only has the side rails at the top, with nothing across the roof. Would I need this item to make this work?https://www.etrailer.com/p-C18118.html?hhyear=2016andhhmake=Toyotaandhhmodel=4Runner

Evangeline M.

12/8/2020

As for the hitch-mounted fishing rod holder, we don't stock any of those here at etrailer. They are very cool looking though. If you still have yours, we do sell front trailer hitches for your 2016 Toyota 4Runner. It depends on what trim-level you have. For SR5, Trail Edition, and TRD models, we have the Draw-Tite front receiver # 65074. For the Limited Edition, we have the Curt Hitch # C31054. For SR5 and Trail Edition, we have Curt Hitch # C31076. These come with install instructions and you can watch the install videos. I found that those help with getting the most accurate quote from your local dealer. I attached some videos below that you might want to check out!

Answer 1

The Rhino-Rack Fishing Rod Carrier #RR576F offers multiple installation options. It can mount to a roof rack by clamping around the rack crossbars (round, square, aero, elliptical, and most factory crossbars) or it can be installed in the top channel…

view full answer...

Answer 2

Since your 2014 Subaru Crosstrek has the factory rails you will need a set of crossbars to mount accessories like the Yakima ReelDeal Rooftop Fishing Rod Carrier item #Y04089 you were looking at. There is a system that mounts directly to the side…

view full answer...

Answer 3

Hey Fran, we have a Curt front hitch that is a confirmed fit for your 2018 Toyota 4Runner Limited with the part #C31054 but the part number you mentioned does not work on the Limited models. What will you use the front hitch for?

view full answer...

Answer 4

According to my contact in the engineering department at Curt, the two front receiver fits for the 2013 Toyota 4Runner are the #C31054 for limited or SR5 models and the #31367 for the Trail models. Curt tells me that due to differences at the front…

view full answer...

Answer 5

Fantastic photos thanks so much, and the short answer is it is very, very likely the skid plate on your 2022 Toyota 4Runner TRD Off Road will interfere with the Curt Front Mount Trailer Hitch Receiver #C31076. This model of 4Runner has a different…

view full answer...

Answer 6

Using a front hitch like Curt #C31078 along with a hitch carrier like #C18151 is a great way to add cargo capacity when your truck bed and rear hitch are already spoken for. The cargo items you describe wanting to load in a front-hitch-mounted cargo…

view full answer...

Answer 7

The Curt #31367 front mounted hitch fit 2007-2014 Toyota 4Runner Tail Edition models. For the 2016 SR5 model, you'll want to use part #C31076.

view full answer...

Answer 8

The Curt Front Hitch #C31076 will install on the front driver and passenger side frame rails. I have linked a picture showing the bolt holes on the passenger side frame rail and it will be the same for the driver's side. I checked and the Curt…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Fishing Pole Holder and Crossbars for 2016 Toyota 4Runner

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching