Recommended Curt Trailer Hitch Receiver For 2007 Toyota Matrix XR

Question

Question:

I have a 2007 Toyota Matrix XR and Ive been looking at the Curt #C12013 and #C12228. #C12013 says it will the XR, and #C12228 says it wont. I want my receiver to be as high as possible so #C12228 looks to be ideal. Is it not advertised as a direct fit because of fascia trimming, or will it not work at all? Thanks!

asked by: Tim

0

Expert Reply:

The reason the Curt Trailer Hitch Receiver # C12228 is not listed as a confirmed fit on your 2007 Toyota Matrix XR is because it was designed to fit the 2009-2013 Matrix.

For your 2007 Matrix XR you will need to use the Curt Trailer Hitch Receiver # C12013 which is the only confirmed fit for your vehicle made by Curt, and as you can see in the picture I included, it will install very close to the rear bumper to give you plenty of ground clearance.

You will need to use the Stabilizing Strap # 18050 for any non-trailer loads.

If you can tell me what you are planning on using your trailer hitch receiver for I would be happy to recommend the best products for your needs.

expert reply by: Samuel C

0

click to enlarge

Answer 1

First, release the mechanism that holds the coupler onto the ball. It may be a lever or a knob that has to be turned. Some require a dual action move where you would push back or forward on the lever while lifting up on it. If you have done this and…

view full answer...

Answer 2

Currently, there are 2 trailer hitches that will fit your 2005 Toyota Matrix XR. One Class-I #24812 (Draw-Tite) and one Class-II #C12013 (Curt). With that said, they are all good products but I would most certainly go with the Class-II Curt hitch…

view full answer...

Answer 3

I went out to the warehouse and examined the Curt Hitch #12221 and #C12013. While they are similar, there is a key difference in the designs. From the top of the mounting brackets on each side of the hitch down to the bottom of the receiver, hitch…

view full answer...

Answer 4

The Curt trailer hitch #C12013 will have the receiver just below the rear fascia on your 2006 Toyota Matrix. Take a look at the review with pictures on the product page to get an idea of where it will be. Curt does say that you need to use a…

view full answer...

Answer 5

Curt trailer hitch #C12221 would be a good option as long as your 2005 Toyota Matrix is not an XR or XRS model. If it is an XR or XRS model then #C12013 would be the best option for a Curt hitch. These are both Class II hitches which means you have…

view full answer...

Answer 6

All available hitches made for your 2007 Toyota Matrix XR include both Class I and Class II types in the 1-1/4-inch size. All are shown on the linked page. You'll notice all three options, parts # 24812, #C12221 and #C12013, share a very similar…

view full answer...

Answer 7

Hi Bernie, There is a Curt hitch for the 2003 Toyota Matrix XR, which is the Curt Trailer Hitch Receiver #C12013. This is as high as a hitch can get on your Matrix XR, and it'll be right up against that lower fascia like you had previously.

view full answer...

Answer 8

The trailer hitch options for a 2006 Toyota Matrix XR are the Draw-Tite Sport Frame Receiver Hitch part #24812 and the Curt Trailer Hitch Receiver part #C12013 which both have a 1-1/4" receiver tube opening. I recommend the Curt Trailer Hitch…

view full answer...

Answer 9

Ball mounts including Curt ball mounts #C45024 and #C45014 are given their rating based on how they are tested and which applications they are made for. Other than that and the capacity they are pretty much the same.

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Recommended Curt Trailer Hitch Receiver For 2007 Toyota Matrix XR

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching