How To Find Correct Replacement Key For Yakima SKS Lock Core

Question

Question:

How do I hey Yakima replacement keys. I do not have the lock number. Sk5 is on the lock but I just lost my only key

asked by: John M

0

Expert Reply:

To get the correct replacement key for your Yakima lock you will need to know the lock number.

If the lock is unlocked you can use the Replacement Control Key for Yakima Same Key System # Y8007835 to remove your lock core and the key number will be on the of the lock core.

For example if your Lock Core says A137 like the # Y8771-A137 you will need Replacement Key # Y8772-A137.

If the lock is currently locked you will need to drill it out and replace the lock core.

expert reply by: Samuel C

0

Answer 1

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 2

Thanks for your question and congrats on your new camper, Glenn! I see you were looking at the Timbren Suspension Enhancement System #T53MR. If you’re just doing casual towing, I wouldn’t recommend going with Timbrens. They’re really best for…

view full answer...

Answer 3

Hi Darrell, congrats on the new boat! The SumoSprings Solo Custom Helper Springs - Rear Axle #SS45FR will indeed help with the sag you are getting. These are a set it and forget it way to go and we have gotten good feedback from others that have gone…

view full answer...

Answer 4

When using the change key part #Y8007835 to remove and replace a lock cylinder what you have to do is first have the lock in the unlocked position. Next you will insert the change key into the core. With the key in the core you will then be able to…

view full answer...

Answer 5

Hi Chris, It sounds like you've found yourself in a bit of a pickle but you're on the right track. If the key broke off in the lock, the easiest solution is to replace the entire Replacement SpeedKnob and Wedge Assembly, Part #8880508. That…

view full answer...

Answer 6

There's no issue with that at all Charles! It'll actually be easier to do this all at once. The Yakima Same Key System item #Y07208 comes with eight replacement/new lock cores, two keys, and a control key. You can purchase as many of these as…

view full answer...

Answer 7

There is definitely a way to lock your Yakima bike rack to your hitch. The Yakima HitchLock #Y07235 is designed to fit both 1 1/4" and 2" hitch pins and will get you all squared away. However, if there are already locks on your bike rack…

view full answer...

Answer 8

In order to get replacement keys for a Yakima bike rack, cargo carrier, roof rack etc. like the Yakima HoldUp 2 Bike Rack part #Y02443 you'll need to know the key code. If you don't have this and the lock cores are unlocked you can use the…

view full answer...

Answer 9

Yes, if you can get the number stamped on your current Yakima key you can pick out replacement lock cores to match that number. You'll then need to just search our site for the part number Y8771-XXX where the X's equal your key number and…

view full answer...

Answer 10

The only way to remove a Yakima SKS lock core without damaging the core is with the control key. If you lost the control key, we offer a replacement key as part #Y8007835. Your only other option would be to either have a lock smith attempt to pick…

view full answer...

How To Find Correct Replacement Key For Yakima SKS Lock Core

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching